[Understanding Measurements and Performing Validation/Editing/Estimation (VEE) Processing] At what stage in the processing related to initial measurement data (IMD) will meter multipliers be applied to measurements?

The Validation, Editing, and Estimation (VEE) process is responsible for transforming raw Initial Measurement Data (IMD) into clean, final measurements ready for billing and other downstream processes. A fundamental step within the VEE stage is the application of meter multipliers (also known as scalars or factors). The VEE engine takes the raw register reading from the IMD and applies the configured multiplier from the measuring component to calculate the actual consumption value. This calculated value is then subjected to the various validation rules (e.g., high/low limit checks, sum checks) within the same VEE process.

A. Prepare for VEE: This stage involves loading and staging the raw data (IMDs) for processing but does not perform calculations like applying multipliers.
C. Critical Validation: While a part of the overall validation framework, "VEE" is the comprehensive stage where fundamental transformations like multiplier application occur before rules are executed.
D. Post-VEE: This stage occurs after validation is complete. Applying the multiplier here would be too late, as the validation rules would have already been executed on the incorrect, un-multiplied raw data.

1. Oracle Utilities Meter Data Management Business User Guide (Release 2.5.0.1.0)

Part Number E96379-01

Chapter 5: Validation

Editing

and Estimation. The "About VEE" section describes the overall process

stating

"The VEE process takes initial measurements received from a head-end system and creates final measurements that can be used for billing." This transformation from initial to final inherently includes applying multipliers to get the true value before validation rules are run.

2. Oracle Utilities Meter Data Management Configuration Guide (Release 2.5.0.1.0)

Part Number E96378-01

Chapter 5: Setting Up Validation

Editing and Estimation. The section "Defining VEE Rules" details how rules operate on measurement values. For these rules to function correctly

the system must first derive the actual consumption value by applying any relevant multipliers. The logic is embedded within the VEE engine's processing sequence.