You need to set up an Oracle Solaris 11 host as an iSCSI target so that the host's disk can be accessed over a storage network. The disk device is…

How to Create an iSCSI LUN The following steps are completed on the system that is providing the storage device. Example: target# zpool create sanpool mirror c2t3d0 c2t4d0 (C)2. Create a ZFS volume to be used as a SCSI LUN. (D)3. Create a LUN for the ZFS volume. Example: target# stmfadm create-lu /dev/zvol/rdsk/sanpool/vol1 Logical unit created: 600144F0B5418B0000004DDAC7C10001 4. Confirm that the LUN has been created. Example target# stmfadm list-lu LU Name: 600144F0B5418B0000004DDAC7C10001 (F) 5. Add the LUN view. This command makes the LUN accessible to all systems. target# stmfadm add-view 600144F0B5418B0000004DDAC7C10001 How to Create the iSCSI Target This procedure assumes that you are logged in to the local system will contains the iSCSI target. Note: The stmfadm command manages SCSI LUNs. Rather than setting a special iSCSI property on the ZFS volume, create the volume and use stmfadm to create the LUN. (H) 1. Enable the iSCSI target service. target# svcadm enable -r svc:/network/iscsi/target:default (I) 2. Create the iSCSI target. target# itadm create-target