300-430 practice question 27 of 30
An engineer configures a deployment to support: Cisco CMX licenses for at least 3000 APs 6000 wIPS licenses The Cisco vMSE appliance must be sized for this deployment. Which Cisco vMSE Release 8 option must the engineer deploy?
Full set: 277 questionsThe selection of the Cisco vMSE appliance size is determined by the required scale of the deployment, specifically the number of Access Points (APs) for location services and wIPS. According to Cisco's official documentation for vMSE Release 8.0, the Standard vMSE profile supports up to 2,000 APs for location services and 5,000 APs for wIPS. The High-End vMSE profile supports up to 10,000 APs for both location and wIPS services. Since the deployment requires support for at least 3,000 APs and 6,000 wIPS licenses, the Standard profile is insufficient. Therefore, the High-End vMSE is the correct option to meet these scaling requirements.
A. Large vMSE: This is not an official profile name in the Cisco vMSE Release 8.0 documentation. The correct profiles are Low-End, Standard, and High-End.
B. Low-End vMSE: This profile supports a maximum of 1,000 APs for either location or wIPS services, which is significantly below the stated requirements.
C. Standard vMSE: This profile's capacity of 5,000 wIPS licenses is insufficient for the required 6,000. It also falls short of the 3,000 AP requirement for location services.
1. Cisco Connected Mobile Experiences (CMX) Version 8.0 Deployment Guide
Cisco Systems
Inc.
Reference: Chapter 2
"Deploying Cisco vMSE
" Table 2-1 "Cisco vMSE Release 8.0 Virtual Appliance Requirements." This table explicitly states the AP and client limits for Low-End
Standard
and High-End vMSE profiles. The High-End profile is listed as supporting up to 10
000 APs for wIPS
which covers the 6
000 required.
2. Cisco 3365 Mobility Services Engine Data Sheet
Cisco Systems
Inc.
Reference: "Cisco MSE Virtual Appliance" section
Table 4 "Cisco MSE Virtual Appliance Specifications." This data sheet corroborates the sizing profiles (Low-End
Standard
High-End) and their respective AP scale for location and wIPS services
confirming that only the High-End profile meets the question's requirements.
Keep practicing
Take the free 300-430 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other 300-430 practice questions
- Question 1A new MSE with wIPS service has been installed and no alarm information appears to be rea…
- Question 2A corporation has employees working from their homes. A wireless engineer must connect 18…
- Question 3An engineer wants to upgrade the APs in a Cisco FlexConnect group. To accomplish this upg…
- Question 4A shopping center uses AireOS controllers with Cisco Wave 2 APs. A separate WLAN named Gu…
- Question 5An engineer has been hired to implement a way for users to stream video content without h…
- Question 6An engineer must implement Cisco Identity-Based Networking Services at a remote site usin…
