300-440 practice question 6 of 10
An engineer must enable the OMP advertisement of BGP routes for a specific VRF instance on a Cisco IOS XE SD-WAN device. What should be configured after the global address-family ipv4 is configured?
Full set: 38 questionsOn a Cisco IOS XE SD-WAN device, routes learned via BGP are not advertised by the Overlay Management Protocol (OMP) by default. To enable the redistribution of BGP routes into the SD-WAN overlay for a specific VRF, the advertise bgp command must be configured. This command is issued within the OMP address-family configuration mode for the specific VRF (sdwan -> omp -> address-family ipv4 vrf ). This action explicitly instructs OMP to advertise the BGP-learned routes to other SD-WAN routers, making them available across the fabric.
A. This option is too generic. The required configuration is specific to advertising routes from the BGP protocol, not just any route advertisement.
C. "Enter sdwan mode" is not a valid command. Configuration is performed under the sdwan global configuration context, which is a preliminary step, not the specific command to enable the advertisement.
D. This is the opposite of the required action. The goal is to enable, not disable, the advertisement of BGP routes into OMP.
1. Cisco SD-WAN Routing Configuration Guide, Cisco IOS XE Release 17.x, "Unicast Routing" chapter, "Redistribute Routes into OMP" section.
This document states, "OMP does not advertise routes that a device has learned from BGP. To have OMP advertise these routes... you must configure redistribution of BGP routes into OMP." It then provides the configuration example showing the advertise bgp command under the sdwan omp address-family ipv4 vrf hierarchy.
2. Cisco SD-WAN Overlay Management Protocol (OMP) Configuration Guide, Cisco IOS XE Release 17.x, "Configuring OMP" chapter, "Advertise Routes to OMP" section.
This guide confirms the default behavior and the necessary configuration: "To have OMP advertise BGP routes to other Cisco vEdge devices, you must enable redistribution of BGP routes into OMP on a per-VRF basis using the advertise bgp command."
Keep practicing
Take the free 300-440 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
