301B practice question 19 of 30
Which command should an LTM Specialist use on the command line interface to show the health of RAID array hard drives?
Full set: 210 questionsThe tmsh command-line interface provides access to system-level hardware information under the /sys module. RAID (Redundant Array of Independent Disks) is a system hardware component. To view the status and health of the individual hard drives that make up the RAID array, the correct command is tmsh show /sys raid disk. This command will output a table listing each physical disk in the array, its slot, and its current status (e.g., ok, failed, rebuilding), which is essential for hardware troubleshooting.
B. tmsh show /ltm raid disk: RAID is a system-level feature, not a Local Traffic Manager (LTM) feature. The /ltm module is incorrect for hardware management.
C. tmsh show /sys raid status: The status component is not a valid option for /sys raid. The correct components are array or disk.
D. tmsh show /ltm disk status: This command is invalid. Disk management is not under the /ltm module, and disk status is not a valid tmsh syntax.
1. F5 Networks. (2023). Traffic Management Shell (tmsh) Reference Guide - sys raid. F5 Cloud Docs. This reference document lists the available components under sys raid, which include array and disk. The description for show /sys raid disk confirms it displays information about the physical disks.
2. F5 Networks. (2022). K14953: Viewing BIG-IP hardware platform information. AskF5. This article lists various commands for checking hardware status, including tmsh show /sys raid disk to "display the status of the RAID physical disks."
3. F5 Networks. (2023). BIG-IP Platform: RAID - Managing the RAID configuration. F5 Cloud Docs. This guide provides instructions for managing RAID and uses the tmsh show /sys raid disk command in its examples for checking disk health.
Keep practicing
Take the free 301B practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other 301B practice questions
- Question 3An LTM Specialist connects to an LTM device via the serial console cable and receives unr…
- Question 5An LTM Specialist realizes that a datacenter engineer has changed the console baud rate. …
- Question 7An LTM device pair is configured for failover and connection mirroring. The LTM devices a…
- Question 13An LTM Specialist has just manually failed the active LTM device over to the standby LTM …
- Question 17-- Exhibit – -- Exhibit -- Refer to the exhibit. An LTM Specialist has created a virtual …
- Question 20Given the iRule: when HTTP_REQUEST { if {([HTTP::username] ne "") and ([HTTP::password] n…
