ACE-P-ALE1-04 practice question 34 of 35
Why is iostat not needed on an Arista switch?
Full set: 100 questionsArista switches utilize flash memory for persistent storage, not traditional spinning hard disks. The Extensible Operating System (EOS) is designed to load and operate primarily from system memory (RAM). Critical state information is held in an in-memory database called Sysdb. This architecture minimizes I/O operations to the underlying flash storage during runtime. The iostat command is a standard Linux utility designed to monitor I/O performance and identify bottlenecks on block storage devices, which is most relevant for systems with hard disk drives. Given that Arista switches lack these drives and are architected to minimize reliance on persistent storage I/O, iostat is not a necessary or useful diagnostic tool.
A. The CPU can see the front panel interfaces to report on traffic. Control plane processes use the CPU to manage interfaces, but iostat is for storage I/O, not network traffic.
C. This is an inaccurate generalization. Memory usage is managed dynamically and is monitored by other tools like free or top, not iostat.
D. The vast majority of network I/O (data plane) is handled by specialized ASICs, not the CPU, so this premise is flawed.
E. CPU features like hyperthreading are unrelated to storage I/O monitoring. The presence or absence of hyperthreading does not affect the utility of iostat.
1. Arista Networks, "EOS Architecture" White Paper. This document describes the fundamental design of EOS, stating, "All state in EOS is held in a centralized system database called Sysdb... Sysdb can be thought of as a database in memory..." This in-memory architecture for state management underscores the minimal reliance on persistent storage I/O during operation, making tools like iostat unnecessary for performance monitoring.
2. Linux Programmer's Manual, iostat(1) man page. The official manual page describes iostat as a tool to "Report Central Processing Unit (CPU) statistics and input/output statistics for devices and partitions." Its primary use case is monitoring block devices (like hard disks) for performance issues, a component absent in Arista's architecture.
3. Arista Networks, "Life of a Packet" TOI Document. Section: "EOS Architecture". This document details how EOS boots from flash storage into RAM. It explains that the running system operates from memory, with the flash drive being used primarily for storing the OS image, configurations, and logs, not for constant read/write operations typical of a general-purpose OS on a hard drive.
Keep practicing
Take the free ACE-P-ALE1-04 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other ACE-P-ALE1-04 practice questions
- Question 1When using the sudo command to run something as root, which password is required?
- Question 2Which utility can be used to remove sections or columns of each line of input?
- Question 3The ps –ef command is from which UNIX variant?
- Question 4In file globbing, which symbol matches any single character?
- Question 5If the system is swapping, what can be done to alleviate the problem?
- Question 6When scripting in bash, it is recommended to always use which symbols around your variabl…
