CWISA-103 practice question 5 of 15
You are deploying a ZigBee network based on the frequency band available for ZigBee deployment worldwide. What allowable action will do the most to minimize ZigBee and 802.11 interference?
Full set: 67 questionsThe IEEE 802.15.4 standard, upon which ZigBee is based, specifies the 2.4 GHz Industrial, Scientific, and Medical (ISM) band for worldwide operation. This band is also heavily utilized by IEEE 802.11 (Wi-Fi) networks, leading to significant potential for co-channel and adjacent-channel interference. The most effective method to mitigate this interference is to ensure the two technologies operate in completely separate, non-overlapping frequency bands. By moving all 802.11 communications to the 5 GHz band, the ZigBee network can operate in the 2.4 GHz band without contention from Wi-Fi signals, thus providing the most comprehensive interference minimization.
A. ZigBee is not defined by the IEEE 802.15.4 standard to operate in the 6 GHz band.
C. ZigBee is not defined by the IEEE 802.15.4 standard to operate in the 5 GHz band.
D. This action would force both networks to compete for the same 2.4 GHz spectrum, maximizing interference rather than minimizing it.
1. IEEE Std 802.15.4™-2020, IEEE Standard for Low-Rate Wireless Networks. Clause 10, "2450 MHz PHY," specifies the physical layer parameters for operation in the 2400–2483.5 MHz band, which is the worldwide band for ZigBee.
2. IEEE Std 802.11™-2020, IEEE Standard for Information Technology...Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications. Annex E, "Channel numbering across regulatory domains," details the channelization for 802.11 operation in both the 2.4 GHz and 5 GHz bands.
3. Sikora, A., & Groza, V. F. (2005). Coexistence of IEEE 802.15.4 with other systems in the 2.4 GHz-ISM-Band. IEEE Instrumentation and Measurement Technology Conference Proceedings. Section IV, "Coexistence Improvement," discusses frequency separation as a primary mitigation strategy, stating, "The most obvious but also most effective method is to use different frequency bands for the different systems (e.g. IEEE 802.11a in the 5 GHz band)." DOI: 10.1109/IMTC.2005.1604455
Keep practicing
Take the free CWISA-103 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other CWISA-103 practice questions
- Question 1You are planning a wireless implementation. At what point should you begin to consider se…
- Question 2What is most often used to track livestock on large farms and identify each animal Indivi…
- Question 3What modulation is used by LoRa?
- Question 4What function does the IEEE perform in relation to wireless technologies?
- Question 6In the simplified three-layer model for wireless IoT, what is the universal primary funct…
- Question 7How is ASK modulation different from FSK modulation?
