You are deploying an OS on a new Dell PowerEdge R760 at a dark-site data center. There is no management network for iDRAC, and you need to configure IDRAC using virtual media. What must you do in order to access the web interface to use the virtual media?

The iDRAC Direct feature is specifically designed for scenarios where direct, local management access is required without connecting to a management network. By connecting a laptop to the server's front micro-USB iDRAC Direct port, an administrator can establish a point-to-point connection. This connection assigns the laptop an IP address (169.254.0.4) to access the iDRAC web interface (at 169.254.0.3). From the web interface, the administrator can then use the virtual media feature to mount an OS installation ISO. This method is ideal for secure or "dark-site" environments where network access is restricted.

A. OpenManage Mobile requires a network connection (Wi-Fi/Ethernet) to the iDRAC or a direct connection via Quick Sync 2, which is a different feature than iDRAC Direct.
B. PXE boot is a method for booting and installing an OS over the network, which is unavailable in this "dark-site" scenario without a management network.
D. Updating iDRAC firmware is a maintenance task. It does not provide a method to access the web interface when no management network is available.

1. Dell Technologies. (2023). Dell PowerEdge R760 Installation and Service Manual. Section: System information. p. 18. "The iDRAC Direct port (Micro-AB USB) ... enables you to directly access the iDRAC web interface."

2. Dell Technologies. (2023). Dell iDRAC9 Version 7.00.00.00 User's Guide. Section: Using the iDRAC Direct feature. p. 33. "Using iDRAC Direct, you can directly connect your laptop to the iDRAC USB port... to access iDRAC interfaces such as the web interface."