You complete the installation of a RecoverPoint with VNX(SE) system with two clusters. The company's storage administrator wants to know how to add an additional cluster at their new data center. Which information should be provided to the administrator?

The existing system is a RecoverPoint with VNX(SE), where "SE" (System Edition) is licensed for a maximum of two clusters. To add a third cluster, the fundamental architecture of the system must be changed. The first and most critical step is to convert the existing two-cluster RecoverPoint/SE system to RecoverPoint/EX (Enterprise Edition), which supports multi-site configurations (more than two clusters). Once the existing system is successfully converted to EX, a new RecoverPoint/EX cluster can be installed at the new data center. Finally, this new cluster is connected to the now-expanded RecoverPoint/EX system, enabling replication across all three sites.

A. This is incorrect because adding a license to the new cluster does not resolve the two-cluster limitation of the existing RecoverPoint/SE system.
B. This is incorrect as it ignores the fundamental licensing constraint; a RecoverPoint/SE system cannot connect to a third cluster without being converted first.
D. This is incorrect because a new cluster is installed, not converted. The conversion from SE to EX must be performed on the existing system.

1. Dell EMC RecoverPoint Administrator's Guide 5.1, Page 311, "Converting a RecoverPoint/SE system to a RecoverPoint/EX system". The guide explicitly states: "To add a third RecoverPoint cluster to a RecoverPoint/SE system, you must first convert the RecoverPoint/SE system to a RecoverPoint/EX system. The conversion process requires a RecoverPoint/EX license." This directly supports the sequence in option C.

2. Dell EMC RecoverPoint Deploying with VNX Series Systems Technical Notes, Page 8, "RecoverPoint/SE". This document defines the product limitations: "RecoverPoint/SE supports a single RecoverPoint system with two clusters." This confirms why the existing system cannot simply have a third cluster attached without modification.

3. Dell EMC RecoverPoint Installation and Deployment Guide 5.1, Page 151, "Adding a RecoverPoint cluster to an existing system". This chapter details the procedure for adding a cluster, which is the final step in the process. However, this procedure is only applicable to a system that can support the additional cluster, which for a third site, must be a RecoverPoint/EX system.