EMEA-ADVANCED-SUPPORT practice question 1 of 10
TCP protocol can be used for data delivery via multicast
Full set: 50 questionsThe Transmission Control Protocol (TCP) is fundamentally a connection-oriented, point-to-point protocol. It is designed to provide reliable, ordered, and error-checked delivery of data between a single sender and a single receiver. This reliability is achieved through mechanisms like the three-way handshake, sequence numbers, and acknowledgments (ACKs) which establish and maintain a unicast session state. Multicast is a one-to-many or many-to-many communication model. A sender transmits a single packet to a multicast group address, and the network delivers copies to all subscribed receivers. TCP's stateful, one-to-one acknowledgment mechanism is incompatible with this model, as a single sender would be overwhelmed by ACKs from potentially thousands of receivers (a problem known as "ACK implosion"). Therefore, the standard TCP protocol cannot be used for multicast data delivery.
A. Yes: This is incorrect. TCP's design for reliable, one-to-one communication, which relies on specific acknowledgments from a single endpoint, is fundamentally incompatible with the one-to-many nature of multicast.
1. RFC 1112 - Host Extensions for IP Multicasting: This foundational document describes the IP multicast service model. Section 4, "The IP Multicasting Service Model," specifies the service as providing "unreliable delivery of IP datagrams to a group of hosts." This datagram model is characteristic of UDP, not the reliable stream service provided by TCP.
2. RFC 793 - Transmission Control Protocol: This RFC defines TCP. Section 1.5, "Operation," describes the protocol's mechanism for establishing a connection between a pair of sockets, which is inherently a point-to-point (unicast) model. The entire reliability mechanism is built upon this one-to-one relationship.
3. Kurose, J. F., & Ross, K. W. (2021). Computer Networking: A Top-Down Approach (8th ed.). Pearson. In Chapter 3, "Transport Layer," the text explains that "TCP provides a reliable, connection-oriented service to the invoking application," which is contrasted with UDP's connectionless model. Multicast applications are consistently presented as use cases for UDP due to TCP's unsuitability for one-to-many communication.
4. Fortinet FortiOS Handbook - Multicast Forwarding: In the official FortiOS documentation, all examples and configurations for multicast policies, PIM (Protocol Independent Multicast), and IGMP (Internet Group Management Protocol) are based on IP multicast addresses and typically specify UDP for the transport protocol, implicitly confirming that TCP is not the protocol used for this function.
Keep practicing
Take the free EMEA-ADVANCED-SUPPORT practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other EMEA-ADVANCED-SUPPORT practice questions
- Question 2In Active FTP who sends the PORT command?
- Question 3Link aggregation allows network devices to________
- Question 4Which of the following is a network monitoring protocol?
- Question 5Which of the following are classful addresses? (Select all that apply below)
- Question 6Which command would you use to verify the status of an IPsec VPN tunnel on a FortiGate?
- Question 7What happens when a FortiGate’s CPU enters conserve mode?
