FCP_FWF_AD-7-4 practice question 1 of 10

What is the relationship between wireless channels and data transmission?

Full set: 30 questions
Answer options
A: The wider the channel the more data it can carry Correct answer
B: Data is transmitted over only one wireless channel at a time
C: The more wireless channels, the more power consumption is required
D: A wireless channel is allocated to transmit data unidirectionally
Correct Answer:
A. The wider the channel the more data it can carry
Explanation

The relationship between a wireless channel's width and its data-carrying capacity is direct and proportional. Wider channels, created by bonding multiple standard 20 MHz channels together (e.g., 40 MHz, 80 MHz, 160 MHz), can accommodate more data subcarriers. This allows for the simultaneous transmission of more data, which results in a higher overall data rate and throughput. This principle is a fundamental aspect of modern Wi-Fi standards like 802.11n, 802.11ac, and 802.11ax (Wi-Fi 6/6E) to achieve higher speeds.

Why Incorrect

B. Data is transmitted over only one wireless channel at a time This is incorrect. Technologies like channel bonding combine adjacent 20 MHz channels into a single wider channel (e.g., 40 MHz) for a single transmission, effectively using multiple channels at once.
C. The more wireless channels, the more power consumption is required This is misleading. Power consumption is primarily determined by the radio's transmit power (Tx Power) and operational state, not the number of available channels in a frequency band.
D. A wireless channel is allocated to transmit data unidirectionally This is incorrect. Wi-Fi communication over a channel is half-duplex, meaning it is bidirectional (supporting both transmit and receive), but not simultaneously.

References

1. Fortinet Official Documentation: In the Deploying 802.11ax with Fortinet guide, it states, "Channel width is the size of the channel used to transmit data. Wider channels allow for higher data throughput. 802.11ax supports 20, 40, 80, and 160 MHz channel widths."

Source: Fortinet, Deploying 802.11ax with Fortinet, Version 1.0, Page 7, "Channel Width" section.

2. University Courseware: Stanford University's course on wireless communication explains this concept. Lecture materials detail how 802.11n and subsequent standards achieve higher data rates through techniques including channel bonding. Doubling the channel width (e.g., from 20 MHz to 40 MHz) effectively doubles the number of data subcarriers, which nearly doubles the peak data rate.

Source: Stanford University, CS244: Advanced Topics in Networking, Lecture notes on "802.11n/ac/ax".

3. Peer-reviewed Publication (IEEE Standard): The IEEE 802.11ac-2013 standard, which introduced VHT (Very High Throughput) operation, formally defines the use of 80 MHz and 160 MHz channels. The increased bandwidth is a primary mechanism for achieving gigabit-per-second data rates.

Source: IEEE Std 802.11ac™-2013, Amendment 4: Enhancements for Very High Throughput for Operation in Bands below 6 GHz, Clause 22.3.16 "Channelization".

Scroll to Top