HPE2-T37 practice question 2 of 25

Your customer built a sever profile for HPE Synergy Gen 10 server and configured boot mode to Legacy BIOS. Which feature Is not available for this Compute Module?

Full set: 115 questions
Answer options
A: BIOS management
B: Workload profile
C: Boot from SAN
D: Secure boot Correct answer
Correct Answer:
D. Secure boot
Explanation

Secure Boot is a security standard that is an integral part of the Unified Extensible Firmware Interface (UEFI) specification. Its purpose is to prevent the loading of unauthorized or maliciously modified firmware, option ROMs, and operating systems during the boot process by verifying their digital signatures. This feature is fundamentally dependent on the UEFI architecture and is not available in the traditional Legacy BIOS boot mode. Therefore, when an HPE Synergy Gen10 Compute Module is configured to use Legacy BIOS, the Secure Boot option cannot be enabled.

Why Incorrect

A. BIOS management: HPE OneView server profiles provide comprehensive BIOS setting management, including configuring boot order and other parameters, regardless of whether the boot mode is Legacy BIOS or UEFI.
B. Workload profile: Workload profiles (e.g., General Power Efficient, Virtualization - Max Performance) are BIOS-level performance and power optimizations available in both Legacy BIOS and UEFI modes on Gen10 servers.
C. Boot from SAN: Booting from a Storage Area Network (SAN) is a standard capability supported by both Legacy BIOS (using HBA Option ROMs) and UEFI boot modes on HPE Synergy compute modules.

References

1. HPE UEFI System Utilities User Guide for HPE ProLiant Gen10 Servers and HPE Synergy (Part Number: 879233-005, Published: May 2020).

Page 101, Section: "Secure Boot options": "Secure Boot is a security feature in the UEFI BIOS. ... To use Secure Boot, you must configure the server to boot in UEFI Mode. When enabled, the UEFI BIOS authenticates each pre-boot image..." This explicitly states that UEFI Mode is a prerequisite for Secure Boot.

2. HPE OneView 7.0 User Guide for HPE Synergy (Part Number: P11103-011, Published: December 2022).

Page 218, Section: "Boot settings": The guide states, "When the boot mode is UEFI or UEFI optimized, you can enable Secure Boot from the Boot Settings screen." This directly implies that Secure Boot is only available in UEFI modes and, by exclusion, not in Legacy BIOS mode.

3. HPE Synergy for Dummies, 2nd Edition (Published by John Wiley & Sons, Inc., An official HPE publication).

Page 51, Chapter 4: "Creating Server Profiles": "UEFI is required for some advanced features, such as Secure Boot..." This confirms that features like Secure Boot are dependent on the UEFI boot mode.

Scroll to Top