You need to troubleshoot an Aruba CX 6300F switch that fails to boot correctly. Select the option that allows you to access the switch and see the boot options available for OS images and ServiceOS.

To troubleshoot a boot failure on an Aruba CX 6300F switch, direct console access is required to view boot messages and interact with the ServiceOS menu. The Aruba CX 6300F model is equipped with a USB-C console port for this purpose. This port provides a serial connection that allows an administrator to monitor the entire boot sequence and access the boot loader options to select a different OS image or perform recovery operations, which is not possible through network-based management interfaces like SSH when the main operating system is not running.

B. RJ-45 console port: The Aruba CX 6300F switch model does not have a traditional RJ-45 serial console port; it uses USB-C for console access.
C. USB-A console port: The USB-A port on the Aruba CX 6300F is intended for file storage, such as loading firmware or saving configurations, not for console access.
D. Omgmt port using SSH: SSH is a network service that requires the switch's main operating system to be fully booted and an IP address configured on the management port. It is unavailable during a boot failure.

1. Aruba 6300 Switch Series Datasheet

Page 4

"Interfaces" section. The table lists "1x USB-C Console Port" for all Aruba 6300F models. This document confirms the physical port type available for console access.

2. Aruba CX 6300 Switch Series Installation Guide

"Front panel LEDs and ports" section (e.g.

Page 10 for 24-port models). The guide provides a diagram and description of the front panel

explicitly identifying the USB-C port as the console port.

3. ArubaOS-CX 10.11 Fundamentals Guide

Chapter: "Management access"

Section: "Console port". It states

"The console port provides out-of-band access to the switch CLI... The console provides access to the switch regardless of the state of the network interfaces. The console will display boot-up

POST

and operating system software messages." This confirms the console port's role in troubleshooting boot issues.