NETWORKS-F5CAB1 practice question 9 of 10
Which configuration file can a BIG-IP administrator use to verify the provisioned modules?
Full set: 49 questionsThe /config/bigipbase.conf file contains the fundamental system-level configurations for a BIG-IP device. This includes the resource provisioning settings for all licensed modules. An administrator can inspect this file to find the sys provision configuration stanzas, which explicitly define the level of system resources (e.g., 'nominal', 'minimum', 'dedicated') allocated to each module, such as LTM, ASM, or APM. This file is the direct source for verifying the current provisioning state of the system's software modules.
A. /config/bigip.license: This file contains the license keys that determine which modules are available to be provisioned, but it does not show their current resource allocation or provisioning status.
C. /config/bigip.conf: This file stores the configuration objects created using the provisioned modules (e.g., virtual servers, pools, iRules), not the module provisioning settings themselves.
D. /var/local/ucs/config.ucs: This is a User Configuration Set (UCS) file, which is a compressed archive used for system backups and restores, not a live configuration file for direct verification.
1. F5 Networks Knowledge Base, K4422: Overview of BIG-IP configuration files (11.x - 17.x). This document explicitly states: "/config/bigipbase.conf: Contains BIG-IP system configuration objects, such as VLANs, self IP addresses, and provisioning." It also clarifies that "/config/bigip.conf: Contains BIG-IP local traffic and network configuration objects, such as virtual servers, pools, and profiles." This directly supports that provisioning information is in bigipbase.conf.
2. F5 Networks Knowledge Base, K14458: The /config/bigipbase.conf file contains the basic network and system configuration for the BIG-IP system. This article provides an example of the bigipbase.conf file content, which includes the sys provision stanza, confirming it as the location for module provisioning details.
3. F5 BIG-IP System: Essentials, Version 13.1.0, Chapter 2: BIG-IP System Setup, Section: Provisioning BIG-IP modules. This guide describes the process of provisioning, which results in modifications to the system's base configuration. The command line equivalent, tmsh modify sys provision..., directly alters the settings stored within the /config/bigipbase.conf file.
Keep practicing
Take the free NETWORKS-F5CAB1 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other NETWORKS-F5CAB1 practice questions
- Question 1A BIG-IP Administrator upgrades the BIG-IP LTM to a newer software version. After the adm…
- Question 2What will setting a Self IP to “Allow None” for Port Lockdown do?
- Question 3Which one of the following is a port and protocol combination allowed by the Allow Defaul…
- Question 4A BIG-IP Administrator plans to upgrade a BIG-IP device to the latest TMOS version. Which…
- Question 5When logged into the bash shell of a BIG-IP system, which of the following commands will …
- Question 6When using the tmsh shell of a BIG-IP system, which command will display the management-i…
