NS0-003 practice question 2 of 15

What are two main benefits when configuring Advanced Disk Partitioning (ADP) on an AFF or FAS system? (Choose two.)

Full set: 93 questions
Answer options
A: Increases deduplication efficiencies.
B: Reduces the RAID parity overhead. Correct answer
C: Decreases disk failure rate.
D: Optimises storage capacity. Correct answer
Correct Answer:
B. Reduces the RAID parity overhead.; D. Optimises storage capacity.
Explanation

Advanced Disk Partitioning (ADP) is a NetApp ONTAP feature that partitions physical drives into smaller logical units. Its primary use is to create root-data partitions on all drives in a system. A small partition on each drive is used for the root aggregate (which holds the ONTAP operating system), while the much larger remaining partition is used for data aggregates. This configuration provides two main benefits. First, it optimises storage capacity by eliminating the need for dedicated, separate drives for the small root aggregate, allowing all drives to contribute to user data capacity. Second, it reduces the RAID parity overhead by avoiding the creation of a small, inefficient RAID group for the root aggregate, which would have a high ratio of parity disks to data disks (e.g., two parity disks for one data disk).

Why Incorrect

A. Increases deduplication efficiencies. Deduplication is a block-level storage efficiency feature; ADP is a disk-level partitioning technology and does not directly affect deduplication rates.
C. Decreases disk failure rate. ADP is a logical software configuration and has no impact on the physical hardware reliability or the mean time between failures (MTBF) of a disk.

References

1. NetApp Technical Report 4475, "Advanced Drive Partitioning":

Page 4, Section "Root-Data Partitioning": "This configuration allows ONTAP to use a small amount of space from each drive for the root aggregate and the rest of the drive for a data aggregate. This feature eliminates the need for dedicated drives for the root aggregate, thereby reducing system cost and optimizing usable capacity." (Supports option D). The report's explanation of avoiding dedicated root drives implicitly supports the benefit of avoiding a small, high-overhead RAID group. (Supports option B).

2. NetApp ONTAP 9 Documentation, "Disk and aggregate management":

Section "How root-data partitioning works": "Root-data partitioning... gives the root aggregate the high performance of a wide, mirrored RAID group without requiring you to dedicate drives to the root aggregate... It also maximizes the storage available for user data." This statement directly supports option D (optimizing capacity) and indirectly supports option B by explaining how the root aggregate is formed efficiently without the overhead of dedicated drives.

3. NetApp ONTAP 9, "Storage Administration" (EDU-ONTAP-SA) Courseware:

Module on "Managing Storage" typically explains that without ADP, a minimum of three dedicated disks are required for a RAID-DP root aggregate, resulting in two disks being used for parity and only one for data. This represents a 66% parity overhead. ADP avoids this inefficient configuration, thus reducing the overall system parity overhead. (Supports option B).

Scroll to Top