NS0-162 practice question 1 of 15
Your company runs a NetApp AFF A220 cluster as a file server for NFS and SMB. You want to use one of the unused ports to connect a single Windows host directly, using FC. You have converted the UTA2 ports e0e and e0f to FC and equipped them with a 16-Gbps FC transceiver. Your Windows host fails to connect to the storage. In this scenario, which action solves the problem?
Full set: 89 questionsNetApp ONTAP systems, including the AFF A220, do not support direct-attach Fibre Channel (FC) configurations for host connectivity when acting as a storage target. The FC target ports on the storage controller are designed to function as Node Ports (NPorts) that must log into a Fabric Port (FPort) on an FC switch. This Fabric Login (FLOGI) process is a mandatory step to establish communication within a Storage Area Network (SAN). Attempting a direct point-to-point connection between the host's HBA and the storage controller's FC port bypasses this required fabric login process, causing the connection to fail. Introducing an FC switch creates the necessary fabric for proper negotiation and communication.
B. Use the arbitrated loop topology on storage and host. Arbitrated Loop (FC-AL) is an outdated legacy topology. Modern NetApp storage systems and host HBAs are designed for and support switched fabric (FC-SW) topology, not FC-AL for host connectivity.
C. Use the point-to-point topology on all ports. This describes the current, failing configuration. While the physical connection is point-to-point, the ONTAP FC target protocol implementation requires a fabric provided by a switch to function correctly.
D. Use an Ethernet switch between storage and host. An Ethernet switch is used for IP-based protocols like iSCSI, NFS, or SMB. It is incompatible with the Fibre Channel protocol, which requires dedicated FC hardware and switches.
1. NetApp ONTAP 9 SAN Administration Guide: "You must connect your storage system to one or more FC switches. Direct-attached FC configurations are not supported."
Source: NetApp ONTAP Documentation Center, "SAN administration overview," Section: "FC and FCoE configuration overview."
2. NetApp Technical Report 4080 (TR-4080): Fibre Channel SAN Best Practices: This document outlines the best practices for designing and implementing a NetApp FC SAN. It exclusively details configurations involving FC switches, implicitly confirming that switched fabric is the required topology. The report does not contain procedures for direct-attach configurations.
Source: NetApp TR-4080, "Fibre Channel SAN Best Practices," Section 2: "SAN Design and Architecture."
3. NetApp Interoperability Matrix Tool (IMT): The IMT is the official source for supported configurations. All validated and supported FC configurations for host-to-storage connectivity show the requirement of a qualified FC switch between the host HBA and the NetApp storage controller. There are no entries for direct-attach FC target configurations.
Source: NetApp Interoperability Matrix Tool (IMT). (Note: This is a dynamic tool, but its results consistently enforce the requirement for a switched fabric).
Keep practicing
Take the free NS0-162 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other NS0-162 practice questions
- Question 3You need to Increase the number of files that can be created In a volume. Which two metho…
- Question 4Which two types of capacity tiers are supported with FabricPool aggregates In ONTAP 9.8? …
- Question 5You want to enable the Internal ONTAP engine that quickly Identifies the file and directo…
- Question 7You are the administrator of an ONTAP 9.8 cluster. Your company wants to know how many fi…
- Question 8You attempt to create an SVM for CIFS access only. In this scenario, which three actions …
- Question 9Windows 2019 reports 500 GB of free space on a disk; however, on the storage side, the LU…
