NS0-403 practice question 12 of 15

You have an AFF A400 system with NetApp ONTAP 9.8 installed. You want to configure the NetApp Cloud Tiering service to tier data to AWS object storage. The communication between your cluster and the AWS cloud needs to be encrypted. You have installed the FabricPool license, but your ONTAP cluster cannot reach the S3 bucket. Which two configurations are causing the error? (Choose two.)

Full set: 60 questions
Answer options
A: You have not configured the TLS encryption.
B: You have not configured your firewall to allow outbound traffic on port 443. Correct answer
C: You have not configured a LIF with a public IP address.
D: You have not configured a LIF with the intercluster role. Correct answer
Correct Answer:
B. You have not configured your firewall to allow outbound traffic on port 443.; D. You have not configured a LIF with the intercluster role.
Explanation

For an ONTAP cluster to connect to a cloud object store like AWS S3 for FabricPool, two fundamental requirements must be met. First, ONTAP uses intercluster LIFs to establish outbound connections to the object store provider. If these LIFs are not configured on the nodes hosting the data, ONTAP has no network path to initiate communication. Second, this communication occurs over HTTPS, which uses TCP port 443. Corporate or data center firewalls must be configured to allow this outbound traffic from the intercluster LIFs to the AWS S3 endpoints. A failure in either of these configurations will result in the cluster being unable to reach the S3 bucket.

Why Incorrect

A. You have not configured the TLS encryption. TLS encryption (via HTTPS) is the default and mandatory communication method for FabricPool with AWS S3. It is not a separately configured option that can be omitted.
C. You have not configured a LIF with a public IP address. ONTAP does not require a public IP on its LIFs. It is standard practice to use private IP addresses for intercluster LIFs and have them translated by a NAT gateway.

References

1. NetApp ONTAP 9.8 Documentation, "Networking requirements for connecting to a cloud tier": This document explicitly states the networking prerequisites for FabricPool.

Reference for B: "You must have an outbound TCP/IP connection from each node in the cluster to the object store. ... The connection uses the HTTPS protocol, which requires that port 443 is open."

Reference for D: "You must create an intercluster logical interface (LIF) on each node that hosts the aggregate that you want to attach to a cloud tier."

Reference for C (Incorrect): "The IP address of the intercluster LIFs can be public or private. If the IP addresses are private, they must be NAT (Network Address Translation) translated to a public IP address."

2. NetApp Technical Report TR-4598, "FabricPool Best Practices": This report details best practices for deploying FabricPool.

Section: "Networking", Page 8.

Quote supporting D: "FabricPool uses intercluster LIFs to communicate with the object store. You must create an intercluster LIF on each node of the cluster."

Quote supporting B: "The connection to the object store is an outbound HTTPS connection on TCP port 443. You must ensure that your firewall allows this traffic."

Scroll to Top