300-715 practice question 33 of 35

A network security administrator needs a web authentication configuration when a guest user connects to the network with a wireless connection using…

Full set: 294 questions
A network security administrator needs a web authentication configuration when a guest user connects to the network with a wireless connection using these steps: . An initial MAB request is sent to the Cisco ISE node. . Cisco ISE responds with a URL redirection authorization profile if the user's MAC address is unknown in the endpoint identity store. . The URL redirection presents the user with an AUP acceptance page when the user attempts to go to any URL. Which authentication must the administrator configure on Cisco ISE?
Answer options
A: device registration WebAuth
B: WLC with local WebAuth
C: wired NAD with local WebAuth
D: NAD with central WebAuth Correct answer
Correct Answer:
D. NAD with central WebAuth
Explanation

The process described is the standard workflow for Central Web Authentication (CWA). The Network Access Device (NAD), which is the Wireless LAN Controller (WLC) in this scenario, performs a MAC Authentication Bypass (MAB) request to Cisco ISE. Because the guest user's MAC address is unknown, ISE responds with an authorization profile containing URL redirection attributes. The NAD then intercepts the user's HTTP/HTTPS traffic and redirects them to the centralized web portal hosted on the ISE node for authentication or AUP acceptance. This entire web interaction is managed centrally by ISE.

Why Incorrect

A. device registration WebAuth: This is used for BYOD onboarding to register a device and provision it with certificates or profiles, which is more complex than the simple AUP acceptance described.
B. WLC with local WebAuth: In Local Web Authentication (LWA), the WLC itself hosts the web portal. The scenario describes ISE sending the redirect URL, indicating the portal is hosted centrally on ISE.
C. wired NAD with local WebAuth: This is incorrect because the scenario explicitly states the user connects via a "wireless connection," not a wired one.

References

1. Cisco Identity Services Engine Administrator Guide, Release 3.2, "Central Web Authentication" section: "In a central web authentication (CWA) deployment, when a guest user connects to a guest SSID, the WLC sends the user's MAC address as the username and password to Cisco ISE for authentication (MAB). If the endpoint is not profiled, Cisco ISE returns a RADIUS Access-Accept message that contains the redirect URL to the WLC. The WLC redirects the user to the guest portal on Cisco ISE."

2. Cisco Identity Services Engine (ISE) Guest Access Prescriptive Deployment Guide, "Central Web Authentication on Wireless" section: "The Central Web Authentication (CWA) solution redirects users to a web portal for authentication before they can access the network... The authentication process is as follows: 1. The user associates to the WLAN... 2. The WLC sends a RADIUS access request to ISE (MAB). 3. ISE returns a RADIUS Access-Accept with two attributes: url-redirect and url-redirect-acl." This flow directly matches the question's description.

Scroll to Top