300-715 practice question 32 of 35

An engineer must use Cisco ISE profiler services to provide network access to Cisco IP phones that cannot support 802.1X. Cisco ISE is configured to use the access switch device sensor information — system-description and platform-type — to profile Cisco IP phones and allow access. Which two protocols must be configured on the switch to complete the configuration? (Choose two.)

Full set: 294 questions
Answer options
A: LLDP Correct answer
B: CDP Correct answer
C: EAPOL
D: SNMP
E: STP
Correct Answer:
A. LLDP; B. CDP
Explanation

The Cisco switch "device sensor" feature is designed to collect attributes from connected endpoints for profiling purposes in Cisco ISE. It gathers this information by listening to specific protocols. For devices like Cisco IP phones, the system-description and platform-type are advertised using the Cisco Discovery Protocol (CDP). The Link Layer Discovery Protocol (LLDP) is the industry-standard equivalent and also carries similar information in its Type-Length-Value (TLV) fields. By enabling CDP and LLDP on the switch, the device sensor can capture these attributes and forward them to ISE within RADIUS accounting packets, allowing ISE to profile the device correctly.

Why Incorrect

C. EAPOL: This protocol is used for 802.1X authentication transport. The question explicitly states the phones cannot support 802.1X, and EAPOL does not carry device-type profiling attributes.
D. SNMP: While ISE can use SNMP as a profiling probe to query the switch, the "device sensor" feature specifically refers to the switch passively collecting endpoint data via protocols like CDP, LLDP, and DHCP.
E. STP: Spanning Tree Protocol is a Layer 2 loop-prevention mechanism and is not involved in collecting endpoint attributes for profiling.

References

1. Cisco Identity Services Engine Administrator Guide

Release 3.1

"Profiler Probes" section: "Cisco switches can collect endpoint attribute data using protocols such as Cisco Discovery Protocol (CDP)

Link Layer Discovery Protocol (LLDP)

and Dynamic Host Configuration Protocol (DHCP). This feature is called the device sensor." This document confirms that the device sensor utilizes CDP and LLDP to gather endpoint data.

2. Cisco IOS XE Bengaluru 17.6.x (Catalyst 9300 Switches) Security Configuration Guide

"Configuring Cisco ISE Device Sensor" chapter: "The device sensor is a feature on the switch that is used for collecting and managing endpoint attribute information. The sensor collects endpoint information by using protocols such as Cisco Discovery Protocol (CDP)

Link Layer Discovery Protocol (LLDP)

and DHCP." This official switch configuration guide directly links the device sensor feature to CDP and LLDP for attribute collection.

3. Cisco Live Presentation BRKSEC-3699

"Advanced ISE Services

Tips

and Tricks" (2019)

Slide 38

"Device Sensor": The presentation slide on Device Sensor explicitly lists "CDP/LLDP/DHCP" as the protocols from which the switch collects attributes to send to ISE via RADIUS accounting. This reinforces that CDP and LLDP are the correct protocols for this function.

Scroll to Top