301A practice question 9 of 25
A LTM device needs to load balance active and passive FTP traffic while using only a single virtual server. Which virtual server type should an LTM Specialist configure on the LTM device?
Full set: 147 questionsTo load balance both active and passive FTP traffic, the BIG-IP LTM must inspect the FTP control channel (typically on port 21) to identify the dynamic data channel ports negotiated by the client and server. This inspection and subsequent handling of the data channel are managed by an FTP profile. Only a Standard virtual server, which operates as a full proxy, can have an FTP profile assigned to it. This configuration allows a single virtual server to intelligently manage the complexities of both FTP modes by parsing the control channel commands (PORT for active, PASV for passive) and correctly directing the data traffic.
A. Forwarding (Layer 2): This virtual server type operates at the data-link layer (Layer 2) and forwards traffic based on MAC addresses, making it unsuitable for application-layer protocols like FTP.
C. Stateless: This virtual server type does not maintain connection state information, which is essential for the stateful, multi-connection nature of the FTP protocol.
D. DHCP relay: This is a specialized virtual server type designed exclusively for relaying DHCP protocol messages, not for general application traffic like FTP.
E. Forwarding (IP): This virtual server acts as a packet-forwarding router at the network layer (Layer 3). It does not inspect application-layer data and cannot use an FTP profile to manage dynamic data ports.
1. F5 BIG-IP LTM Implementations Guide (v15.1), Chapter: Configuring Application-Specific Traffic, Section: Configuring an FTP profile. The documentation states, "You can configure a BIG-IP system to process File Transfer Protocol (FTP) traffic. To do this, you create an FTP profile and assign it to a standard virtual server." This explicitly links the required functionality to the Standard virtual server type.
2. F5 Knowledge Center, K14163: Overview of BIG-IP virtual server types (11.x - 17.x). This article describes the Standard virtual server as a "general-purpose virtual server that...processes traffic using a full-proxy architecture," which is necessary for applying application-layer profiles. It describes a Forwarding (IP) virtual server as one that "forwards packets directly to the destination IP address...A Forwarding (IP) virtual server is not a proxy."
3. F5 BIG-IP LTM Concepts Guide (v15.1), Chapter: Virtual Servers, Section: Virtual server types. This guide details that Standard virtual servers are the primary type for managing application traffic through profiles, while Forwarding virtual servers perform packet-level forwarding without application-layer inspection.
Keep practicing
Take the free 301A practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other 301A practice questions
- Question 1An application is expected to maintain more than 100,000 concurrent TCP connections to a …
- Question 2A virtual server is using a TCP profile based on the top-wan-optimized profile for a stre…
- Question 4An LTM Specialist needs to gather website statistics such as latency and throughput on th…
- Question 5An LTM Specialist is configuring a virtual server with an IP address. Which configuration…
- Question 7An TLM Specialist needs to configure a virtual server to terminate SSL connection on the …
- Question 11An LTM device configured with a management IP address and route and a series of self-IPs …
