301B practice question 22 of 30
An application owner claims an LTM device is delaying delivery of an HTTP application. The LTM device has two VLANs, an internal and an external. The…
Full set: 210 questionsTo investigate latency claims, it is necessary to capture traffic on both the client-side (external VLAN) and server-side (internal VLAN) of the LTM device. The special interface 0.0 allows tcpdump to capture traffic across all TMM interfaces simultaneously. This creates a single capture file containing both ingress and egress packets for a given flow, which is the most efficient way to correlate timestamps and precisely measure the processing delay introduced by the LTM device itself.
B. one capture on the internal interface: This only shows server-side traffic, making it impossible to determine when the client's request arrived at the LTM.
C. one capture on the external interface: This only shows client-side traffic, making it impossible to determine when the LTM forwarded the request to the server.
D. one capture on the management interface: The management interface is not in the data path for application traffic and would not contain the relevant packets.
F5 Networks. (2023). K411: Overview of packet tracing with the tcpdump utility. F5 Support. In the "Interface" section, it states: "0.0 - Captures traffic on all interfaces."
F5 Networks. (2023). K12783074: Finding the source of network latency. F5 Support. The article describes using tcpdump on interface 0.0 to "capture traffic on both the client and server side of the BIG-IP system" for latency analysis.
F5 Networks. (2022). BIG-IP LTM Local Traffic Manager: Implementations. In Chapter "Troubleshooting," the methodology for analyzing latency involves comparing timestamps from client-side and server-side captures, which is most efficiently done with a single capture on interface 0.0.
Keep practicing
Take the free 301B practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other 301B practice questions
- Question 3An LTM Specialist connects to an LTM device via the serial console cable and receives unr…
- Question 5An LTM Specialist realizes that a datacenter engineer has changed the console baud rate. …
- Question 7An LTM device pair is configured for failover and connection mirroring. The LTM devices a…
- Question 13An LTM Specialist has just manually failed the active LTM device over to the standby LTM …
- Question 17-- Exhibit – -- Exhibit -- Refer to the exhibit. An LTM Specialist has created a virtual …
- Question 19Which command should an LTM Specialist use on the command line interface to show the heal…
