301B practice question 26 of 30

An LTM Specialist is troubleshooting an issue with a new virtual server. When connecting through the virtual server, clients receive the message…

Full set: 210 questions
An LTM Specialist is troubleshooting an issue with a new virtual server. When connecting through the virtual server, clients receive the message "Unable to connect" in the browser, although connections directly to the pool member show the application is functioning correctly. The LTM configuration is: ltm virtual /Common/vs_https { destination /Common/10.10.1.110:443 ip-protocol udp mask 255.255.255.255 pool /Common/pool_https profiles { /Common/udp { } } translate-address enabled translate-port enabled vlans-disabled } ltm pool /Common/pool_https { members { /Common/172.16.20.1:443 { address 172.16.20.1 } } } How should the LTM Specialist resolve this issue?
Answer options
A: Remove an HTTP monitor from the pool.
B: Add an HTTP profile to the virtual server.
C: Enable the pool member on the correct VLAN.
D: Select the correct protocol for the virtual server. Correct answer
Correct Answer:
D. Select the correct protocol for the virtual server.
Explanation

The virtual server is configured to handle HTTPS traffic, which operates over the TCP protocol. The provided configuration snippet shows ip-protocol udp, which is a direct contradiction. When a client's browser attempts to establish a TCP connection (for HTTPS) with the virtual server, the BIG-IP system, expecting UDP traffic, will not respond correctly and will drop the packets. This results in a connection failure, appearing as "Unable to connect" in the browser. To fix this, the virtual server's protocol must be changed to TCP.

Why Incorrect

A: A monitor issue would mark a pool member down, but the root cause is the fundamental protocol mismatch on the virtual server itself. B: An HTTP profile cannot be applied to a UDP virtual server; the protocol must be corrected to TCP before this is possible. C: The vlans-disabled setting means the virtual server accepts traffic on all VLANs, so VLAN configuration is not the issue.

References

- F5 Cloud Docs, "BIG-IP LTM: Virtual Servers", Section: "About virtual servers". This document outlines the basic components of a virtual server, including the protocol setting, which must match the type of application traffic being processed (e.g., TCP for HTTPS).

- F5 BIG-IP LTM: Implementations Manual, "Chapter 3: F5 BIG-IP LTM Virtual Servers", Section: "Virtual Server Settings". This section details the Protocol setting and its importance for matching the expected client traffic.

Scroll to Top