350-101 practice question 7 of 25

A network engineer must isolate all guest users connected to the WLAN on a Cisco 9800 WLC so they cannot communicate with each other but can access…

Full set: 103 questions
A network engineer must isolate all guest users connected to the WLAN on a Cisco 9800 WLC so they cannot communicate with each other but can access the internet. The WLAN must meet these requirements: •SSID named VisitorAccess assigned to VLAN 30 •guests prohibited from sharing files with other guests •must be scalable to multiple access points in the building Which action must the network engineer take to meet the requirements?
Answer options
A: Enable P2P blocking in the policy profile and map the WLAN to a dedicated guest VLAN. Correct answer
B: Set up local authentication and map the WLAN to a dedicated guest VLAN.
C: Set up a FlexConnect group and use local switching for the guest WLAN internet access.
D: Enable multicast mode and associate a RADIUS server with the guest WLAN.
Correct Answer:
A. Enable P2P blocking in the policy profile and map the WLAN to a dedicated guest VLAN.
Explanation

Peer-to-Peer (P2P) blocking in the policy profile prevents frames from one wireless client being forwarded to another on the same SSID, achieving guest isolation. Mapping VisitorAccess to VLAN 30 meets the dedicated-guest-VLAN requirement and scales automatically across all APs controlled by the 9800.

Why Incorrect

B – Local authentication does not isolate guests from each other. C – FlexConnect/local switching not necessary; central switching already scales and isolation still required. D – Multicast/RADIUS settings do not stop client-to-client traffic.

References

1. Cisco Catalyst 9800 Series Configuration Guide, “Configure Peer-to-Peer Blocking,” p. 75 (IOS XE 17.9).

2. Cisco Guest Access Design Guide, 2022, Sec. “Guest User Isolation with P2P Blocking,” para. 2.

Scroll to Top