350-101 practice question 8 of 25

An engineer has been tasked with configuring a Cisco Catalyst 9100 AP to join a WLC using a static configuration as DHCP and DNS discovery methods…

Full set: 103 questions
An engineer has been tasked with configuring a Cisco Catalyst 9100 AP to join a WLC using a static configuration as DHCP and DNS discovery methods are not available. The engineer has set the AP hostname to ‘AP053540555’, and has configured the AP with a static IP address, subnet mask, and default gateway. The engineer must now configure the AP to discover the primary WLC with hostname ‘WLC-PRIMARY’ and IP address ‘192.168.100.10’. Which CLI command must the engineer use on the AP?
Answer options
A: capwap ap WLC-PRIMARY 192.168.100.10
B: ap primary-base WLC-PRIMARY capwap 192.168.100.10
C: capwap ap primary-base 192.168.100.10
D: capwap ap primary-base WLC-PRIMARY 192.168.100.10 Correct answer
Correct Answer:
D. capwap ap primary-base WLC-PRIMARY 192.168.100.10
Explanation

To statically point a Catalyst 9100 AP at a specific controller, use the CAPWAP primary-base command specifying the WLC name followed by its IP address. This populates the AP’s primary controller AP Join Profile and is effective even when DHCP/DNS discovery methods are unavailable.

Why Incorrect

A. Argument order is invalid; command keyword “primary-base” is missing.
B. Places controller name after keyword but inserts extra keyword “capwap” in wrong position.
C. Omits required controller name parameter, making command incomplete.

References

1. Cisco Catalyst 9100 Series Access Points Deployment Guide, IOS XE 17, “Specifying a Primary Controller”, Example: capwap ap primary-base WLC1 10.10.10.5.

2. Cisco Aironet & Catalyst AP Command Reference, IOS XE 17, command “capwap ap primary-base ”.

3. Cisco WLC Best Practices White Paper, rev 3.1, p. 9.

Scroll to Top