CCST-NETWORKING practice question 1 of 10

A local company requires two networks in two new buildings. The addresses used in these networks must be in the private network range. Which two address ranges should the company use? (Choose 2.) Note: You will receive partial credit for each correct selection.

Full set: 40 questions

Domain Addressing and Subnetting

Answer options
A: 172.16.0.0 to 172.31.255.255 Correct answer
B: 192.16.0.0 to 192.16.255.255
C: 11.0.0.0 to 11.255.255.255
D: 192.168.0.0 to 192.168.255.255 Correct answer
Correct Answer:
A. 172.16.0.0 to 172.31.255.255; D. 192.168.0.0 to 192.168.255.255
Explanation

The Internet Engineering Task Force (IETF) defined specific IPv4 address ranges for private networks in RFC 1918. These addresses are not routable on the public internet and are intended for use within internal networks, such as corporate LANs. The three reserved blocks are 10.0.0.0/8, 172.16.0.0/12, and 192.168.0.0/16. The options 172.16.0.0 to 172.31.255.255 and 192.168.0.0 to 192.168.255.255 directly correspond to the Class B and Class C private ranges specified in this standard, making them the correct choices for the company's new networks.

Why Incorrect

B. The range 192.16.0.0 is a public address space. The private range specified by RFC 1918 is 192.168.0.0/16.
C. The 11.0.0.0/8 block is a public address space allocated to the United States Department of Defense and is not available for private use.

References

1. Rekhter

Y.

Moskowitz

B.

Karrenberg

D.

de Groot

G. J.

& Lear

E. (1996). Address Allocation for Private Internets. IETF. RFC 1918. Section 3

"Private Address Space

" page 4. This document specifies the three blocks of IP address space reserved for private internets.

2. Cisco. (2023). IP Addressing and Subnetting for New Users. Document ID: 13788. In the section "Private Addresses

" this official guide explicitly lists the three private address ranges: 10.0.0.0 to 10.255.255.255

172.16.0.0 to 172.31.255.255

and 192.168.0.0 to 192.168.255.255.

3. Kurose

J. F.

& Ross

K. W. (2021). Computer Networking: A Top-Down Approach (8th ed.). Pearson. In Chapter 4

Section 4.2.2

"The Network Address Translation (NAT) Protocol

" the text discusses the address ranges for private networks as specified by RFC 1918.

Keep practicing

Take the free CCST-NETWORKING practice test

Ten exam-style questions with answers and explanations, plus the exam facts and study guides.

Start the free practice test

More questions

Other CCST-NETWORKING practice questions

Scroll to Top