CFPS practice question 8 of 25
At what temperature do cellulose nitrate products begin to decompose?
Full set: 189 questionsCellulose nitrate is a thermally unstable material that undergoes exothermic decomposition. While slow decomposition can begin at temperatures as low as 120°F (49°C), the rate accelerates significantly with increasing temperature. At approximately 300°F (149°C), the decomposition becomes very rapid, releasing large volumes of flammable and toxic gases (such as oxides of nitrogen, carbon monoxide, and carbon dioxide). This rapid decomposition can lead to spontaneous ignition and, under confinement, may become explosive. For fire protection purposes, 300°F (149°C) is considered the critical temperature at which the hazard becomes acute.
A. 581° F (305° C): This temperature is far above the point of rapid decomposition and autoignition for cellulose nitrate.
B. 425° F (218° C): This is significantly higher than the temperature at which cellulose nitrate becomes dangerously unstable and begins to rapidly decompose.
C. 350° F (177° C): While decomposition is rapid at this temperature, the widely recognized critical threshold for the onset of rapid decomposition is 300°F (149°C).
1. National Fire Protection Association (NFPA). (2015). Fire Protection Handbook (21st ed.). Section 13, Chapter 5, "Unstable and Reactive Materials," p. 13-58. The text states, "Decomposition of cellulose nitrate begins at temperatures as low as 49°C (120°F) and accelerates as the temperature increases. At 149°C (300°F), decomposition is very rapid and can be explosive."
2. National Fire Protection Association (NFPA). (2019). NFPA 40: Standard for the Storage and Handling of Cellulose Nitrate Film. Annex A, Section A.3.3.3. This section notes, "Decomposition of cellulose nitrate film is a chemical process that can be accelerated by heat. The process is slow at ordinary temperatures but is rapid at temperatures of 300°F (150°C) and higher."
3. SFPE. (2016). SFPE Handbook of Fire Protection Engineering (5th ed.). Chapter 18, "Ignition of Solids," Table 18.10. This table lists the autoignition temperature of Nitrocellulose (pyroxylin) in the range of 130–140°C (266–284°F), which is consistent with the rapid decomposition and subsequent ignition around 300°F (149°C).
Keep practicing
Take the free CFPS practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other CFPS practice questions
- Question 1What is the minimum pipe diameter size for direct discharge of steam inside a water tank?
- Question 2Fire alarm systems audible appliances ratings are usually stated as a sound pressure leve…
- Question 3What temperature measurement device consists of a pair of wires of different metals or al…
- Question 4Large quantities of flammable or combustible liquids (all classes) are best transferred
- Question 5The coefficient of discharge of a fire hydrant when the outlet is smooth and well-rounded…
- Question 6What is the occupancy factor used by the Insurance Services Office (ISO) for computing re…
