CFPS practice question 21 of 25
What type of detector is constructed using a stainless steel tubing or outer later over a ceramic thermistor core protecting a center conductor?
Full set: 189 questionsThe description provided—a stainless steel outer layer, a ceramic thermistor core, and a center conductor—accurately details the construction of an analog (or continuous thermistor) line-type heat detector. This type of detector functions as a continuous sensor along its entire length. The thermistor material's electrical resistance changes predictably with temperature, and a control unit monitors this resistance to detect a fire condition. The stainless steel tubing provides durability and protection in harsh environments.
B. Spot heat detector: This type of detector senses heat at a single, fixed location and does not have a continuous, linear construction like a cable or tube.
C. Fiber optic heat detector: While a form of linear heat detection, this technology uses changes in light properties (e.g., Raman scattering) within a glass fiber, not a ceramic thermistor and electrical conductor.
D. Bimetallic heat detector: This mechanism uses two dissimilar metals bonded together that bend when heated to close a circuit. It is typically found in spot-type detectors, not linear ones.
1. SFPE Handbook of Fire Protection Engineering, 5th Edition. Chapter 21, "Detection of Heat," Section 21.4.2, "Line-Type Heat Detectors." This section describes "Continuous Thermistor (Analog) Cable" detectors as consisting of "a center conductor, a negative temperature coefficient (NTC) thermistor material, and an outer sheath... The outer sheath can be made of various materials, including stainless steel for harsh environments."
2. NFPA 72®, National Fire Alarm and Signaling Code®, 2022 Edition. Annex A, Section A.17.6.2.4.1. This section provides explanatory material on line-type heat detectors, describing technologies that use conductors separated by heat-sensitive insulation or thermistor materials, which aligns with the construction described in the question.
3. Cote, A. E. (Ed.). (2003). Fire Protection Handbook (19th ed.). National Fire Protection Association. Section 6, Chapter 2, "Heat Detection." This chapter details the operating principles of various heat detectors, including analog linear heat detectors, describing their construction with a central conductor, thermistor material, and a protective outer sheath.
Keep practicing
Take the free CFPS practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other CFPS practice questions
- Question 1What is the minimum pipe diameter size for direct discharge of steam inside a water tank?
- Question 2Fire alarm systems audible appliances ratings are usually stated as a sound pressure leve…
- Question 3What temperature measurement device consists of a pair of wires of different metals or al…
- Question 4Large quantities of flammable or combustible liquids (all classes) are best transferred
- Question 5The coefficient of discharge of a fire hydrant when the outlet is smooth and well-rounded…
- Question 6What is the occupancy factor used by the Insurance Services Office (ISO) for computing re…
