H12-811_V1-0 practice question 4 of 35
A trunk interface allows frames from multiple VLANs including VLAN 4096.
Full set: 304 questionsThe statement is false because the valid range for VLAN IDs as defined by the IEEE 802.1Q standard is 0 to 4095. Within this range, VLAN IDs 1 through 4094 are available for general user configuration. VLAN ID 0 is used for priority tagging, and VLAN ID 4095 is reserved for protocol use. A VLAN ID of 4096 is outside the 12-bit field allocated for VLAN identification and is therefore invalid. A trunk interface can carry frames for multiple valid VLANs, but not for the non-existent VLAN 4096.
True: This option is incorrect because VLAN ID 4096 is not a valid identifier according to the IEEE 802.1Q standard. The maximum possible VLAN ID is 4095.
1. Huawei. (2020). HCIA-Datacom V
Keep practicing
Take the free H12-811_V1-0 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other H12-811_V1-0 practice questions
- Question 1The router that runs OSPF first enters the Full state and then synchronizes the LSDB.
- Question 2SNMP packets are transmitted by UDP.
- Question 3Making a call on a landline telephone is a type of network communication.
- Question 5Static NAT can only implement one-to-one mapping between private and public addresses.
- Question 6The load balancing modes at both ends of an Eth-Trunk can be different.
- Question 7According to the VTY user interface configuration shown in the following figure, the user…