According to the VTY user interface configuration shown in the following figure, the user level is set to 3.

This statement is true, assuming the referenced (but not provided) figure shows the command user privilege level 3 configured under the VTY user interface view. On Huawei devices, this command sets the privilege level for users who log in through that specific VTY line. Level 3 is the "management level," which grants users the authority to execute all configuration and management commands. Without this command, users would default to a lower privilege level (typically 0 or 1).

This is a true/false question. "False" would be incorrect if the figure contains the user privilege level 3 command, which is the premise of the question.

1. Huawei HedEx Documentation, AR1200 Series Enterprise Routers Command Reference, "Basic Configuration Commands > user privilege level". This document describes the command's function: "The user privilege level command sets the priority of users on a specified user interface." It also confirms that level 3 is the management level.

2. Huawei HedEx Documentation, VRP V800R012C00 Configuration Guide - Security, "Local Authentication and Authorization Configuration". This guide explains the different user levels (0-15), defining level 3 as the management level with rights to run configuration commands.