MTCNA practice question 4 of 30

There are two wireless cards (wlan1 and wlan2) which are bridged together. On wlan1 card there is a setting "Forwarding=no". Choose the correct answer(s):

Full set: 214 questions
Answer options
A: Stations on wlan2 will be able to communicate with stations on wlan2 Correct answer
B: Stations on wlan2 will be able to communicate with stations on wlan1 Correct answer
C: Stations on wlan1 will be able to communicate with stations on wlan1
D: To prevent communication between wlan1 and wlan2 one cannot use Bridge Filters
E: Stations on wlan1 will be able to communicate with stations on wlan2 Correct answer
Correct Answer:
A. Stations on wlan2 will be able to communicate with stations on wlan2; B. Stations on wlan2 will be able to communicate with stations on wlan1; E. Stations on wlan1 will be able to communicate with stations on wlan2
Explanation

The default-forwarding=no (Forwarding=no) setting on a wireless interface is a client-to-client isolation feature. It prevents wireless clients associated to that same interface from communicating directly with each other through the AP. It does NOT affect communication between clients on different interfaces.
- A (wlan2↔wlan2): Forwarding is set on wlan1, not wlan2. wlan2 clients communicate freely. Correct.
- B (wlan2→wlan1): Cross-interface traffic is bridged normally; the setting only blocks same-interface forwarding. Correct.
- E (wlan1→wlan2): Traffic between different interfaces is unaffected by this setting. Correct. The restriction applies ONLY to wlan1-client ↔ wlan1-client communication.

Why Incorrect

C. Forwarding=no on wlan1 specifically blocks wlan1 stations from communicating with each other; this is the exact behavior being disabled.
D. False statement. Bridge Filters CAN be used to control/prevent traffic between wlan1 and wlan2 at the bridge level.

References

1. MikroTik Documentation – Wireless Interface (default-forwarding property), MikroTik Wiki/Help.mikrotik.com: "default-forwarding – Controls whether communication between connected clients is allowed or not." (Section: Wireless → Interface Configuration Properties)

2. MikroTik RouterOS Manual – Wireless Station Isolation: Describes that disabling forwarding isolates clients on the same interface only. (help.mikrotik.com/docs → Wireless → Configuration)

3. MikroTik MTCNA Training Material (Official Outline) – Module: Wireless Networking, "Wireless Security and Client Isolation" section — confirms default-forwarding scope is per-interface.

4. MikroTik Documentation – Bridge Filters: Confirms bridge filtering rules can be applied to control inter-port (inter-interface) traffic. (help.mikrotik.com/docs → Bridging → Bridge Filters)

Note: The MTCNA curriculum relies almost exclusively on MikroTik's own vendor documentation. No independent peer-reviewed academic publications or university courseware exist that specifically address RouterOS default-forwarding behavior, as this is proprietary vendor functionality. The references above are drawn from officially sanctioned MikroTik sources, which are the authoritative documentation for this exam domain.

Scroll to Top