MTCNA practice question 7 of 30
What does the firewall action "Redirect" do? Select all true statements.
Full set: 214 questionsThe redirect action is a form of destination NAT that sends the packet to the router's own IP address on the incoming interface. The to-ports parameter defines the destination port on the router. This is why it is used for transparent proxying—traffic is captured and delivered to a local service running on the router. Thus, the redirect action targets the router (C) and a specified port on the router (A). It does not send traffic to an external IP or to a port on another host—that behavior corresponds to the separate dst-nat action.
B. Redirecting to a specified IP is the function of dst-nat (using to-addresses), not redirect.
D. Sending to a port on another host in the network is dst-nat behavior; redirect targets only the router itself.
1. MikroTik Documentation – Manual: IP/Firewall/NAT, section "Actions," entry for redirect: "redirect – replaces destination address of an IP packet to router's local address." (help.mikrotik.com / RouterOS documentation, NAT Actions table).
2. MikroTik Documentation – Manual: IP/Firewall/NAT, parameter description "to-ports – places packet to specified port" — used together with the redirect action for local router services.
3. MikroTik MTCNA Training Material (Official Course Outline) – Module: Firewall, NAT actions subsection distinguishing dst-nat (to a host/IP) from redirect (to the router).
4. MikroTik Wiki – NAT (Network Address Translation), "Redirect and Masquerade" section: describes redirect as destination NAT to the router itself, contrasted with dst-nat to specified addresses.
5. RouterOS Reference Manual, Firewall NAT chapter, action definitions table (redirect vs. dst-nat), clarifying redirect operates on the router's local address with to-ports.
Note: MikroTik consolidates its NAT action definitions in the official RouterOS documentation (help.mikrotik.com). The distinction between redirect (router-local) and dst-nat (arbitrary host/IP) is the authoritative basis for selecting A and C.
Keep practicing
Take the free MTCNA practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other MTCNA practice questions
- Question 1How many usable IP addresses are there in a 20-bit subnet?
- Question 2Which is the default port of IP-Winbox?
- Question 3The highest queue priority is
- Question 4There are two wireless cards (wlan1 and wlan2) which are bridged together. On wlan1 card …
- Question 5In the Route List, the identification DAb for a route stands for
- Question 6Which layer 4 protocol is used for a Telnet connection?
