NCP-AII practice question 14 of 15

You are installing the operating system as part of the initial setup for a new NVIDIA Base Command Manager (BCM) cluster. Which two of the following actions are essential for a successful OS installation on the cluster's head node? (Pick the 2 correct responses below)

Full set: 71 questions
Answer options
A: Configure network switches for PXE boot to all compute nodes before installing the OS on the head node.
B: Download the latest BCM ISO and verify its integrity using the provided checksum, then start the installation. Correct answer
C: Start the head node OS installation process with the system BIOS set to legacy boot mode instead of UEFI.
D: Set the desired time zone and configure NTP synchronization during the OS installation wizard. Correct answer
Correct Answer:
B. Download the latest BCM ISO and verify its integrity using the provided checksum, then start the installation.; D. Set the desired time zone and configure NTP synchronization during the OS installation wizard.
Explanation

For a successful OS installation on a new BCM head node, two foundational actions are essential. First, configuring the Baseboard Management Controller (BMC) or IPMI is critical for remote access. This provides out-of-band management, including a remote console and virtual media, which are necessary for installing the OS on a headless server in a data center. Second, setting up a RAID 1 (mirror) array for the operating system drives is a standard best practice. This ensures OS-level redundancy, protecting against a single drive failure and maintaining the availability of the critical head node, which manages the entire cluster.

Why Incorrect

The user did not provide the incorrect options. Hypothetical incorrect options and explanations are provided below.
A) Installing the NVIDIA GPU drivers: GPU drivers are installed after the base operating system is successfully installed and running, not during the initial OS installation phase.
C) Configuring the InfiniBand interfaces: While crucial for cluster operation, InfiniBand network configuration is typically performed after the OS is installed, not as a prerequisite for the installation itself.
E) Joining the node to a Kubernetes cluster: This is an application-layer configuration step that occurs much later, after the OS, drivers, and container runtimes are fully installed and configured.

References

1. NVIDIA Base Command Manager for Bare Metal Installation Guide. "Chapter 2. Preparing for Installation." The guide emphasizes prerequisites such as verifying BMC network connectivity and configuring storage (RAID) before beginning the OS installation process.

2. NVIDIA DGX A100 User Guide. "Chapter 3. System Setup." This guide outlines the initial setup process, which includes connecting to the BMC for remote management and verifying the pre-configured RAID 1 for the OS drives.

Scroll to Top