PSP practice question 16 of 35
The balanced magnetic switch differs from the simple magnetic switch in that it:
Full set: 312 questionsDomain Physical Security Assessment
A balanced magnetic switch (BMS) is a high-security sensor designed to be resistant to tampering. Unlike a simple magnetic switch, which uses a single magnet to operate a reed switch, a BMS incorporates a more complex arrangement of magnets and a reed switch. This creates a "balanced" magnetic field. If an unauthorized person attempts to defeat the sensor by placing an external magnet nearby, this action disrupts the delicate balance of the magnetic field, causing the switch to change state and trigger an alarm. This inherent anti-tamper capability is the primary feature that makes it harder to defeat than a simple magnetic switch.
A. Both simple and balanced magnetic switches can be used on non-ferrous doors. Special models or mounting hardware are required for both types when used on ferrous (steel) doors.
B. Mounting orientation is determined by the specific manufacturer's instructions for a given model, not by the general type of switch (simple vs. balanced).
C. Both switch types consist of a single switch and magnet assembly (a pair of components) installed on one opening; they are not used in pairs of complete sets.
1. ASIS International
Protection of Assets (POA) Manual
Physical Security volume (2012). In the chapter on Intrusion Detection Sensors
it is explained that balanced magnetic switches are designed for higher security applications because they are difficult to compromise with an external magnet. The text clarifies that an attempt to defeat the switch by introducing another magnet will unbalance the internal magnetic circuit and generate an alarm. (Specifically referenced in sections covering high-security sensors for openings).
2. Garcia
M. L.
The Design and Evaluation of Physical Protection Systems
2nd ed.
Butterworth-Heinemann (2007). Chapter 5
"Sensors
" discusses the vulnerabilities of simple magnetic switches to defeat by an external magnet. It then introduces balanced magnetic switches as a countermeasure
stating
"To counter this vulnerability
balanced magnetic switches were developed. These devices alarm not only when the switch and magnet are separated but also when an external magnet is brought into the vicinity of the switch." (p. 93).
3. Fennelly
L. J.
& Perry
M. S.
Effective Physical Security
5th ed.
Butterworth-Heinemann (2017). In the chapter on "Alarms and Security Systems
" the text differentiates between standard and high-security magnetic contacts. It describes balanced magnetic switches as high-security devices specifically designed to "detect the presence of a compromising magnet" and thus are "more difficult to defeat." (Chapter 11
section on Magnetic Contacts).
Keep practicing
Take the free PSP practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other PSP practice questions
- Question 1Some people emerge as experts who then sell their expertise for a fee; these people are c…
- Question 2The concept of __________ arises from agency law in which one party has the power to cont…
- Question 3What allows people to log on to a remote computer and use the resources of that system if…
- Question 4During project management, which of the following deliverables are part of the design pha…
- Question 5Which of the following is NOT included in the pass systems?
- Question 6Administrative workload is substantially decreased when which service is employed?
