WCNA practice question 5 of 35
Which protocol is used to locate the hardware address of a local target or local router?
Full set: 100 questionsThe Address Resolution Protocol (ARP) is specifically designed to resolve a known Layer 3 address (like an IPv4 address) into its corresponding Layer 2 hardware address (like a MAC address) for a device on the same local network segment. When a host needs to send a packet to another host or a router on the local network, it uses ARP to discover the destination's MAC address to properly frame the packet for link-layer transmission.
A (ip): The Internet Protocol (IP) operates at Layer 3 and is concerned with logical addressing and routing between networks, not resolving hardware addresses on a local link. C (DNS): The Domain Name System (DNS) resolves human-readable domain names (e.g., www.wireshark.org) into IP addresses. It does not work with hardware addresses. D (DHCP): The Dynamic Host Configuration Protocol (DHCP) is used to automatically assign IP addresses and other network configuration settings to clients. It does not perform on-demand resolution of IP addresses to MAC addresses for other devices.
1. Plummer, D. (1982). An Ethernet Address Resolution Protocol. RFC 826. Internet Engineering Task Force (IETF). https://doi.org/10.17487/RFC0826. (The abstract states the protocol's purpose is "to dynamically discover the mapping from a 32-bit Internet Protocol address to a 48-bit Ethernet address.")
2. Comer, D. E. (2018). Internetworking with TCP/IP Volume 1: Principles, Protocols, and Architecture (6th ed.). Pearson. (Chapter 5, "Address Resolution (ARP)", is dedicated to explaining the protocol's function in mapping IP addresses to physical hardware addresses.)
Keep practicing
Take the free WCNA practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other WCNA practice questions
- Question 2Which term defines an alias name used in DNS responses?
- Question 3What is the most efficient method for saving non-contiguous packets in a trace file?
- Question 4Which display filter is used to display all DHCP traffic?
- Question 6You are performing a TCP scan on a target while capturing your traffic with Wireshark. Wh…
- Question 7You are analyzing network traffic, but you only see ARP queries - you do not see any ARP …
- Question 8What is the purpose of creating Wireshark profiles?
