WCNA practice question 7 of 35

You are analyzing network traffic, but you only see ARP queries - you do not see any ARP responses. What could cause this situation?

Full set: 100 questions
Answer options
A: Wireshark is not running in monitor mode.
B: You have applied an ip filter to the traffic.
C: You are filtering on IP addresses for another network.
D: You are connected to a switch port that is not spanned. Correct answer
Correct Answer:
D. You are connected to a switch port that is not spanned.
Explanation

On a modern switched network, a standard port only receives broadcast frames and unicast frames destined for its own MAC address. An ARP query is a broadcast, so the capture interface sees it. However, the ARP response is a unicast frame sent directly to the original requester's MAC address. If your analysis machine is a third party on a different port, the switch will not forward this unicast response to your port. To see all traffic between other hosts, the switch port must be configured for mirroring or spanning (SPAN), which copies traffic from other ports to the monitoring port.

Why Incorrect

A. Monitor mode is for capturing raw 802.11 frames on wireless networks and is not relevant for capturing ARP on a typical wired Ethernet network.
B. An ip filter would hide all non-IP traffic, including both ARP queries and responses, as ARP is a separate Layer 2 protocol.
C. Filtering on IP addresses for another network is an IP-layer filter and would have no effect on the visibility of non-IP ARP frames.

References

1. Chappell, L., & Combs, G. (2018). Wireshark Network Analysis: The Official Wireshark Certified Network Analyst (WCNA) Study Guide (2nd ed.). Chappell University. (Chapter 3: "Methods of Capturing Packets," Section: "Capturing on a Switched Network").

2. Wireshark Development Team. (n.d.). Wireshark User's Guide: 6.3. Capturing on a Switched Network. Wireshark.org. Retrieved from https://www.wireshark.org/docs/wsughtmlchunked/ChCapSwitched.html (This section explains why a hub or a SPAN port is needed).

3. Kurose, J. F., & Ross, K. W. (2017). Computer Networking: A Top-Down Approach (7th ed.). Pearson. (Chapter 6: "The Link Layer and LANs," Section 6.3: "Link-Layer Addressing and ARP").

Scroll to Top