300-730 practice question 6 of 25
An engineer has configured Cisco AnyConnect VPN using IKEv2 on a Cisco IOS router. The user cannot connect in the Cisco AnyConnect client, but receives an alert message "Use a browser to gain access." Which action does the engineer take to resolve this issue?
Full set: 175 questionsThe alert message "Use a browser to gain access" indicates that the Cisco IOS router's HTTP/HTTPS server is intercepting the AnyConnect connection attempt. This typically happens when the router is configured for both SSLVPN (web-based) and IKEv2. The AnyConnect client attempts to connect, but the router's web server responds as if it were a browser connection, directing it to a web portal. For a dedicated IKEv2 AnyConnect deployment, the HTTP/HTTPS server should be disabled to ensure that the IKEv2 daemon (which listens on UDP ports 500/4500) properly handles the connection request without interference.
A. Reset user login credentials. Incorrect credentials would result in an authentication failure message, not a prompt to use a browser.
B. Correct the URL address. The address is likely correct, but the connection is being handled by the wrong service (HTTP server) on the router.
C. Connect using HTTPS. The goal is to connect using IKEv2, which uses UDP, not HTTPS (TCP 443). Forcing HTTPS would initiate an SSLVPN connection instead.
1. Cisco, "AnyConnect IKEv2 on IOS/IOS-XE Headend Deployment Guide," Document ID: 119218. Section: "Troubleshooting," subsection "Use a browser to gain access," states, "This error is seen when the HTTP/S server on the router is enabled. The HTTP/S server intercepts the connection and tries to redirect it to the WebVPN portal. In order to resolve this issue, disable the HTTP/S server on the router with the no ip http server or no ip http secure-server command."
Keep practicing
Take the free 300-730 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other 300-730 practice questions
- Question 1An administrator is deciding which authentication protocol should be implemented for thei…
- Question 2A network engineer must design a clientless VPN solution for a company. VPN users must be…
- Question 3A user is experiencing delays on audio calls over a Cisco AnyConnect VPN. Which implement…
- Question 5Which command must be configured on the tunnel interface of a FlexVPN spoke to receive a …
- Question 7Which parameter must match on all routers in a DMVPN Phase 3 cloud?
- Question 9An administrator is planning a VPN configuration that will encrypt traffic between multip…
