301A practice question 24 of 25

One LTM device in an HA pair of LTM devices is unable to reach its default gateway. An HA Failover event needs to happen. Which configuration item enables this behavior?

Full set: 147 questions
Answer options
A: iRule
B: Gateway Fail Safe Correct answer
C: Gateway pool monitor
D: Gateway pool
Correct Answer:
B. Gateway Fail Safe
Explanation

Gateway Fail-Safe is a high-availability feature specifically designed to monitor the health of an upstream gateway router. The LTM device periodically sends ICMP echo requests to a defined IP address (the gateway). If the device fails to receive a response within a specified timeout period, it considers the gateway unreachable. This triggers the configured failsafe action, which in an HA pair is typically to fail over to the peer device. This ensures that traffic is not sent to a device that has lost its primary path to the rest of the network, preventing a "black hole" scenario.

Why Incorrect

A. iRule: An iRule is a script for inspecting and manipulating traffic flow. It does not natively monitor system-level network connectivity to trigger an HA failover.
C. Gateway pool monitor: While a monitor is used to check health, "Gateway pool monitor" is not the name of the HA failover feature. The failover is triggered by the Gateway Fail-Safe configuration, which uses a monitoring method.
D. Gateway pool: A gateway pool is a logical grouping of routers. While Gateway Fail-Safe can be configured to monitor this pool, the pool itself is not the mechanism that initiates the failover.

References

1. F5 BIG-IP Device Service Clustering: Administration Manual

Section: Chapter 3: High Availability Fail-Safe > Configuring Gateway Fail-Safe

Content: "You can configure a feature known as gateway fail-safe. When you configure gateway fail-safe, the BIG-IP system monitors a gateway router and, if the router becomes unavailable, the system can take some action, such as forcing the active cluster member to a standby state. This feature prevents the BIG-IP system from directing traffic to an unavailable gateway router."

2. F5 Knowledge Base Article: K13297

Title: Overview of VLAN failsafe

Section: Gateway failsafe

Content: "Gateway failsafe monitors traffic between the BIG-IP system and a pool of routers. If the BIG-IP system cannot pass traffic to the gateway router pool, a failover is triggered." This article, while focused on VLAN failsafe, clearly distinguishes and defines the purpose of Gateway failsafe.

3. F5 Knowledge Base Article: K7543

Title: The Gateway Failsafe feature may not trigger a failover

Section: Description

Content: "The Gateway Failsafe feature is designed to monitor the availability of a specific gateway router and trigger a failover if the router becomes unavailable." This directly supports that Gateway Fail-Safe is the feature responsible for this behavior.

Scroll to Top