ASIS-CPP practice question 15 of 30
The criterion that serves as the basis for rating fire-resistant document containers exposed to heat for varying periods of time is the:
Full set: 230 questionsThe internationally recognized standard for rating fire-resistant document containers, such as UL 72 (Tests for Fire Resistance of Record Protection Equipment), bases its classification on the maximum interior temperature allowed during a specified period of fire exposure. For containers designed to protect paper documents (Class 350), the primary criterion is that the internal temperature must not exceed 350°F (177°C). This threshold is set because paper begins to char and degrade significantly above this temperature. The rating (e.g., 1-hour, 2-hour) indicates the duration for which the container can maintain this safe internal temperature while exposed to a standardized fire.
A. This describes a water-resistance test (fire hose stream test), which is a separate evaluation and not the primary basis for the heat-resistance rating.
B. The percentage of charred documents is a result of failure. The rating criterion is the temperature threshold that prevents charring from occurring in the first place.
D. While the rate of temperature rise is a factor in performance, the ultimate pass/fail criterion is the absolute maximum temperature reached within the rated time, not the speed at which it rises.
1. Fennelly
L. J.
& Perry
M. A. (Eds.). (2021). Protection of Assets: Physical Security. ASIS International. In Chapter 5
"Information Protection
" the section on "Protection of Records" details the Underwriters Laboratories (UL) 72 standard
specifying that Class 350 ratings are based on the criterion that the interior temperature does not exceed 350°F (177°C).
2. Underwriters Laboratories. (2005). UL 72: Standard for Tests for Fire Resistance of Record Protection Equipment. Section 1.1
"Scope
" and Section 7
"Fire Endurance Test
" establish that the performance endpoint is determined by the maximum temperature rise permitted on the interior of the equipment. For Class 350
this limit is 350°F (177°C).
3. Fischer
R. J.
Halibozek
E.
& Walters
D. C. (2019). Introduction to Security (10th ed.). Butterworth-Heinemann. Chapter 13
"Physical Security II: Access Control
Intrusion Detection
and Fire Protection
" explains that fire-resistive containers are rated based on the time they can withstand a fire while keeping the internal temperature below a specific point (e.g.
350°F for paper).
Keep practicing
Take the free ASIS-CPP practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other ASIS-CPP practice questions
- Question 1The major advantage of zero-based budgeting is that:
- Question 2While conducting an executive protection risk assessment, the executive protection specia…
- Question 3Which of the following surveys should be conducted to determine the effectiveness of risk…
- Question 4Establishing an in-house guard service requires:
- Question 5After an information loss, which of the following three steps should be taken by an organ…
- Question 6If an employer does not utilize testing for drug impairment it should:
