CTS practice question 3 of 35
[Developing AV Solutions] According to AVIXA Standards, what is the MINIMUM load rating for truss that will hold a 5000 lbs (2268 kg) LED wall?
Full set: 254 questionsAccording to industry safety standards for overhead rigging, a minimum design safety factor of 5:1 is typically required for static loads. This means the truss and all rigging components must be rated to hold at least five times the weight of the load they will support. For a 5000 lbs LED wall, the calculation is 5000 lbs × 5 = 25,000 lbs. This safety margin accounts for unforeseen dynamic forces, material fatigue, and ensures the safety of people and property below the suspended structure.
A. A 15,000 lbs rating represents a 3:1 safety factor, which is insufficient for overhead suspension.
C. A 30,000 lbs rating represents a 6:1 safety factor, which is safer but not the specified minimum.
D. A 50,000 lbs rating represents a 10:1 safety factor, which far exceeds the typical minimum requirement.
1. AVIXA. (2020). CTS Certified Technology Specialist Exam Guide, Third Edition. McGraw-Hill. Chapter 8, "Installing AV Systems," p. 299. The guide discusses structural mounting and states, "A general rule of thumb is to apply a 5:1 design factor for noncertified mounting structures."
2. Entertainment Services and Technology Association (ESTA). (2018). ANSI E1.4-1 – 2018, Entertainment Technology—Manual Counterweight Rigging Systems. Section 5.1.1. While specific to counterweight systems, ESTA standards, which are foundational for AV rigging, consistently cite design factors of 5:1 to 10:1 for safety.
Keep practicing
Take the free CTS practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other CTS practice questions
- Question 1[Developing AV Solutions]Which method of control is supported by HDBaseT?
- Question 2[Conducting a Needs Assessment] During a site survey, a client states that there will be …
- Question 4[Developing AV Solutions] What key specification of an owner furnished credenza will a te…
- Question 7[Developing AV Solutions] In an audiovisual system where a touch panel is to be connected…
- Question 8[Developing AV Solutions]After there is an approved labor change to a project, what shoul…
- Question 9[Developing AV Solutions]When an audio device can no longer accurately reproduce the audi…
