CTS practice question 9 of 35
[Developing AV Solutions]When an audio device can no longer accurately reproduce the audio signal, It is called
Full set: 254 questions[Developing AV Solutions]
When an audio device can no longer accurately reproduce the audio signal, It is called
Distortion is the general term for any alteration of the original waveform of an audio signal. When an audio device is pushed beyond its operational limits, it can no longer accurately reproduce the input signal, leading to various forms of distortion such as clipping, harmonic distortion, or intermodulation distortion. This results in an output signal that is a corrupted version of the original, which is precisely what the question describes.
A. feedback: This is a specific condition where a sound loop occurs between a microphone and a speaker, causing a sustained tone.
B. dithering: This is an intentional process of adding low-level noise to a digital audio signal to improve resolution at low signal levels.
D. saturation: This is a specific type of compression and distortion that occurs when an analog medium (like tape) can no longer handle the signal level.
1. Huber, D. M., & Runstein, R. E. (2017). Modern Recording Techniques (9th ed.). Routledge. Chapter 5, "Signal Processing," Section on "Distortion." (This is a standard text in university audio engineering programs).
2. AVIXA. (2019). CTS Certified Technology Specialist Exam Guide, Third Edition. McGraw-Hill Education. Chapter 6, "Audio Systems," p. 198.
3. Pohlmann, K. C. (2010). Principles of Digital Audio (6th ed.). McGraw-Hill. Chapter 4, "Fundamentals of Digital Audio," Section on "Dither," pp. 67-72.
Keep practicing
Take the free CTS practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other CTS practice questions
- Question 1[Developing AV Solutions]Which method of control is supported by HDBaseT?
- Question 2[Conducting a Needs Assessment] During a site survey, a client states that there will be …
- Question 3[Developing AV Solutions] According to AVIXA Standards, what is the MINIMUM load rating f…
- Question 4[Developing AV Solutions] What key specification of an owner furnished credenza will a te…
- Question 7[Developing AV Solutions] In an audiovisual system where a touch panel is to be connected…
- Question 8[Developing AV Solutions]After there is an approved labor change to a project, what shoul…
