CWDP-305 practice question 2 of 35
What two 802.11 amendments deal with regulatory and transmission requirements? Response:
Full set: 341 questionsDomain WLAN Design and Site Surveying
The 802.11d amendment, often referred to as "world mode," enables access points to broadcast country-specific regulatory information. This allows client devices to automatically configure their operational parameters, such as valid channels and maximum transmit power levels, to comply with the local regulations of the country they are in. The 802.11h amendment specifies mechanisms for spectrum and transmit power management, primarily for operation in the 5 GHz band. It introduced two key mandatory features for regulatory compliance in many regions: Dynamic Frequency Selection (DFS) to detect and avoid co-channel operation with radar systems, and Transmit Power Control (TPC) to dynamically adjust and limit the client's transmission power.
A. 802.11k: This amendment defines radio resource measurement reporting, which helps clients make better roaming decisions but does not address regulatory compliance.
B. 802.11i: This amendment focuses on security enhancements for the MAC layer, defining the framework for Robust Security Networks (RSN), including WPA2.
D. 802.11f: This was a withdrawn recommended practice for an Inter-Access Point Protocol (IAPP) to facilitate the handoff of clients between APs.
1. IEEE Std 802.11-2020, "Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications," IEEE Standard for Information Technology.
For 802.11d: Clause 11.23, "Country information," describes the mechanism for a station (STA) to identify its regulatory domain from information provided by an access point (AP) to configure its PHY accordingly.
For 802.11h: Clause 10.12, "Spectrum management services," details the requirements for Dynamic Frequency Selection (DFS) and Transmit Power Control (TPC), which originated from the 802.11h amendment to meet regulatory requirements for sharing spectrum.
2. Geier, J. (2015). Designing and Deploying 802.11 Wireless Networks: A Practical Guide to Implementing 802.11n and 802.11ac Wireless Networks For Enterprise-Based Applications (2nd ed.). Cisco Press.
Chapter 3, "802.11 Standards": This chapter explains that 802.11d specifies how devices can operate in different regulatory domains and that 802.11h adds DFS and TPC for 5-GHz band regulatory compliance, particularly in Europe.
3. Carnegie Mellon University, School of Computer Science. "15-441/641: Computer Networks - Lecture 21: Wireless."
The course materials often describe the evolution of 802.11 standards, noting that 802.11h was developed to satisfy European regulations for the 5 GHz band by introducing DFS and TPC, while 802.11d addresses operation in different international regulatory domains.
Keep practicing
Take the free CWDP-305 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other CWDP-305 practice questions
- Question 1Using a SCA means that all APs will be using the same channel in a given layer. How is th…
- Question 3What type of protection should be provided to outdoor antenna installations? Response:
- Question 4What service must be implemented on your customer's network to authenticate users against…
- Question 5Why does a frame transmitted at 1 Mbps have a greater usable range than the same frame tr…
- Question 6Prior to meeting with the customer for the first time, you should do which of the followi…
- Question 7You are conducting a physical site survey where heavy machinery is repaired. What is a co…
