CWNA-109 practice question 6 of 25
You are troubleshooting a problem with interference from a non-802.11 device. Given that the device is not a WLAN device, you cannot use a protocol analyzer and have chosen to use a spectrum analyzer. You want to view the signal from the interfering device over time to see the activity that is generating. What common spectrum analyzer view should you use for this analysis?
Full set: 122 questionsA spectrum analyzer's waterfall or spectrogram view is specifically designed to display RF energy over time. This view plots frequency on one axis, time on the other, and uses color intensity to represent the amplitude (power) of the signal. This historical perspective is crucial for identifying the patterns and duration of intermittent or periodic interference from non-802.11 devices, which would not be apparent in a static, real-time view.
A. APs: This is a view from an 802.11-aware tool that lists detected access points, not a raw spectrum analysis view for non-WLAN interferers.
C. Real-time FFT: The Fast Fourier Transform (FFT) view displays signal amplitude versus frequency at a single moment in time, providing a snapshot rather than a history of activity.
D. Clients: This view, similar to the APs view, is specific to 802.11 protocol analysis and lists detected client stations, not raw RF energy.
1. CWNP, LLC. (2021). CWNA Certified Wireless Network Administrator Study Guide: Exam CWNA-109 (6th ed.). Wiley. In Chapter 16, "WLAN Troubleshooting," the section on Spectrum Analyzers describes the spectrogram graph (also called a waterfall plot) as a view that "shows RF signal strength over time." It contrasts this with the Real-Time FFT, which shows a "snapshot in time."
2. Keysight Technologies. (2019). Spectrum Analysis Basics (Application Note 150). Publication Number 5952-0292EN. Page 22, under the section "Spectrogram Display," states, "The spectrogram is a three-dimensional display of frequency (x-axis), time (y-axis), and amplitude (color)... It is useful for analyzing signals that vary over time, such as frequency-hopping signals or intermittent interference."
3. Hiertz, G. R., Denteneer, D., Stibor, L., Zang, Y., Costa, X. P., & Walke, B. (2010). The IEEE 802.11s Mesh Wireless LAN Standard. IEEE Wireless Communications, 17(1), 104-111. https://doi.org/10.1109/MWC.2010.5416357. While focused on mesh, this and similar peer-reviewed articles on wireless communications presuppose the use of spectrum analyzers for physical layer analysis, where spectrograms are the standard tool for visualizing time-varying signals and interference. The fundamental principles of spectrum analysis are a prerequisite for such research.
Keep practicing
Take the free CWNA-109 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other CWNA-109 practice questions
- Question 1You manage a WLAN with 100 802.11ac access points. All access points are configured to us…
- Question 2You have implemented an 802.11ax WLAN for a customer. All APs are four stream HE APs. The…
- Question 3You are the network administrator for ABC Company. Your manager has recently attended a w…
- Question 4The BSA of an AP covers the area used by the sales and marketing department. Thirty-five …
- Question 5What is always required to establish a high quality 2.4 GHz RF link at a distance of 3 mi…
- Question 7You are implementing a VHT-capable AP. Which one of the following channels is available i…
