HPE0-S59 practice question 10 of 10

Your customer has me following HPE Synergy setup - Three frames fully populated with HPE Synergy 480 Gen10 Plus modules and 25Gb/s downlink speed…

Full set: 125 questions

Domain Describe, differentiate, and apply industry-standard, foundational compute architectures and technologies

Your customer has me following HPE Synergy setup - Three frames fully populated with HPE Synergy 480 Gen10 Plus modules and 25Gb/s downlink speed formulating a single logical enclosure - Two HPE Virtual Connect SE 100Gb F32 Module for Synergy - Four HPE Synergy 50Gb interconnect Link Module - Six HPE Synergy Virtual Connect SE 32Gb FC Modules The customer needs to add a frame. Which statement about the expansion of this setup is true?
Answer options
A: The additional frame must have HPE Virtual Connect FC modules installed
B: The customer can grow the existing logical enclosure up to 5 frames Correct answer
C: The customer has to create a new logical enclosure for the additional frame
D: The additional frame cannot have 12Gb SAS connection modules installed
Correct Answer:
B. The customer can grow the existing logical enclosure up to 5 frames
Explanation

An HPE Synergy logical enclosure using a master/satellite interconnect topology is architecturally limited to a maximum of five frames. The described setup, with two HPE Virtual Connect SE 100Gb F32 master modules and HPE Synergy 50Gb Interconnect Link Modules, is designed for multi-frame configurations. Since the customer currently has three frames, they can expand the existing logical enclosure by adding two more frames, one at a time, to reach the maximum supported limit of five frames. This scalability is a core design feature of the HPE Synergy platform.

Why Incorrect

A. The additional frame must have HPE Virtual Connect FC modules installed. While adding a frame requires matching the existing logical interconnect configuration, which includes the FC modules, this is a procedural rule. Option B describes a more fundamental architectural capability regarding the setup's maximum scale.
C. The customer has to create a new logical enclosure for the additional frame. This is incorrect. The use of Interconnect Link Modules (ILMs) is specifically to enable the expansion of a single logical enclosure across multiple frames, avoiding the need for separate management domains.
D. The additional frame cannot have 12Gb SAS connection modules installed. This is incorrect. HPE Synergy logical enclosures can support multiple fabric types (Ethernet, FC, SAS) concurrently. SAS connection modules can be installed in available interconnect bays in the new frame.

References

1. HPE Synergy Planning Guide: In the section "HPE Synergy building blocks," under "HPE Synergy Frame," it is stated that "Up to 5 HPE Synergy 12000 Frames can be configured in a single logical enclosure for most configurations." This confirms the five-frame limit. (Reference is conceptual as specific page numbers vary by edition, but this is a core concept in the guide's architectural overview).

2. HPE OneView 7.0 User Guide for HPE Synergy: In the chapter "Logical Enclosures," the section "Grow a logical enclosure" states: "The new enclosure must contain the same number of interconnects of the same type and in the same bays as the enclosures already in the logical enclosure." This confirms the procedural requirement mentioned in option A.

3. HPE Synergy Interconnect and Networking Solution Technology White Paper (a00026319enw): Page 4 states, "The HPE Synergy multi-enclosure solution supports up to five frames in a single logical enclosure." This document explicitly confirms the architectural limit described in the correct answer.

Scroll to Top