IDPX practice question 16 of 25
What is the MOST effective construction method to help mitigate impact noise from high heels on ahard floor surface?
Full set: 175 questionsImpact noise is structure-borne sound generated by an object striking a building assembly, such as footsteps on a floor. The most effective method to mitigate this type of noise is to isolate the impact at its source. A resilient underlayment, installed between the finished hard flooring and the subfloor, acts as a shock absorber. This decouples the flooring surface from the main structure, dissipating the impact energy before it can travel through the floor joists and radiate as sound into the space below. This method directly addresses the cause of the problem, making it superior to treatments that only manage airborne sound.
A. Higher NRC in the ceiling material addresses airborne sound absorption within a room (reverberation), not the transmission of structure-borne impact noise from the floor above.
B. A framed-in upholstered wall panel system is a treatment for walls and primarily controls airborne sound; it has no effect on impact noise from the floor/ceiling assembly.
D. Blanket insulation is effective at absorbing airborne sound within the floor/ceiling cavity but is significantly less effective at mitigating direct impact noise than a resilient layer at the source.
1. Ballast
David Kent. Interior Design Reference Manual
6th ed.
Professional Publications
Inc.
2012. Chapter 10: Acoustics
"Impact Noise
" pp. 10-8 to 10-9. (This section explains that impact noise is controlled by methods that cushion the impact
specifically mentioning carpet
padded underlayment
and resilient underlayments to improve the Impact Insulation Class (IIC) rating).
2. Ramsey
Charles George
and Harold Reeve Sleeper. Architectural Graphic Standards
12th ed.
edited by The American Institute of Architects
John Wiley & Sons
2016. Chapter 8: General Construction
"Acoustical Design
" Subsection "Control of Structure-Borne Sound
" p. 698. (This source illustrates that structure-borne sound is controlled by isolating and damping the vibrating source
for which resilient materials in a floor assembly are a primary method).
3. Quirt
J.D. Guide to Sound Insulation in Wood-Frame Construction. National Research Council Canada
Institute for Research in Construction
1985 (revised). IRC-IR-693. Section 3.2 "Impact Sound Insulation of Floors
" pp. 16-18. (This guide states
"The most effective way to improve the impact insulation of a floor is to use a soft floor finish... A resilient underlay under a hard floor finish can also be very effective.").
Keep practicing
Take the free IDPX practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other IDPX practice questions
- Question 1Prior to the contract document phase, a designer should meet with a client for what purpo…
- Question 2Contract documents serve as the legal contract between
- Question 3During which phase is it BEST to consider integrating a security system in a project?
- Question 4What floor finish would BEST support a passive solar design strategy in a hot arid climat…
- Question 5While performing a survey of an existing elevator lobby in a sprinklered commercial build…
- Question 6On a small project with an unclear scope involving multiple stakeholders, which fee metho…
