NS0-093 practice question 7 of 15
Which two statements are correct when describing L1 and L2 Watch Dog Resets (WDR)? (Choose two.)
Full set: 61 questionsDomain NETAPP DATA STORAGE SOFTWARE
The Watchdog Reset (WDR) is a two-stage hardware-assisted mechanism in ONTAP to recover a non-responsive node. The L2 WDR represents the second and final stage. It is initiated 2 seconds after the initial unresponsive event. A critical and defining feature of the L2 WDR is that it forces a system panic to generate a core dump file before performing a hard reset of the hardware. This core dump is essential for NetApp support to perform a root cause analysis of the hang or panic event. Therefore, the timing and the core dump action are the key characteristics of this final recovery stage.
B. L1 WDR is initiated after 0.5 seconds from the event. This statement is factually correct, but it describes the preliminary L1 stage. The L2 characteristics (timing and core dump) are more critical from a diagnostic and recovery standpoint.
C. L1 WDR performs a soft reset. This statement is also factually correct. However, the L2 WDR's ability to generate a core dump is a more significant distinguishing feature for troubleshooting severe system issues.
1. NetApp Knowledge Base, Article ID: 1013892, "What are L1 and L2 Watchdog Resets (WDR)?"
Section: Environment: "The L1 WDR is a soft reset that is initiated after 0.5 seconds from the event... The L2 WDR is a hard reset that is initiated after 2 seconds from the event. The L2 WDR requests the creation of a core dump before the reset." This single source confirms that all four statements (A, B, C, D) are factually correct, but A and D describe the most severe and diagnostically significant event (L2).
2. NetApp ONTAP 9.7 Documentation, "System-level diagnostics guide," Page 11, Section: "Core dump overview."
Paragraph 1: "A core dump is a file that contains the state of the system memory at the time of a system failure... A system failure can be caused by a software fault (panic) or a hardware fault (watchdog timer reset)." This document confirms that a watchdog timer reset is a cause for a core dump, which is the action performed by the L2 WDR as stated in option A.
Keep practicing
Take the free NS0-093 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other NS0-093 practice questions
- Question 1What is the default amount of time that a volume is available for recovery from the volum…
- Question 2While performing a health check on a cluster, you notice the following entries in the clu…
- Question 3During which two operations is the NVRAM replayed by the high-availability (HA) partner? …
- Question 4Which two commands confirm whether an aggregate is WAFL inconsistent? (Choose two.)
- Question 5What are two valid options for uploading a core file from a node that is running ONTAP 9.…
- Question 6Which two statements regarding drive 1.2.3.L1 are true? (Choose two.)
