PSP practice question 11 of 35

IP sends information across networks in packets, each containing between 1 and approximately:

Full set: 312 questions

Domain Implementation of Physical Security Measures

Answer options
A: 1,000 characters
B: 12, 00 characters
C: 15, 00 characters Correct answer
D: 18, 00 characters
Correct Answer:
C. 15, 00 characters
Explanation

The size of an IP packet is practically limited by the Maximum Transmission Unit (MTU) of the underlying data link layer protocol. For Ethernet, which is the most prevalent networking technology for Local Area Networks (LANs), the standard MTU is 1500 bytes. This means a single IP packet, including its header and payload, can be up to 1500 bytes. Assuming one character is represented by one byte (as in ASCII), an IP packet can contain approximately 1500 characters. Packets larger than the MTU must be fragmented into smaller pieces to be transmitted across the network link.

Why Incorrect

A. 1,000 characters: This is significantly smaller than the standard MTU for Ethernet and is not the typical upper limit for an IP packet.
B. 1,200 characters: While some network configurations might use a non-standard MTU, 1200 is not the common or approximate maximum size.
D. 1,800 characters: This value exceeds the standard Ethernet MTU of 1500 bytes. While larger frames ("jumbo frames") exist, they are not the standard.

References

1. Internet Engineering Task Force (IETF) RFC 894

A Standard for the Transmission of IP Datagrams over Ethernet Networks

April 1984. Section: "Frame Format". This foundational document states

"The maximum total length of an Ethernet frame is 1518 octets... The maximum size of the data field of a packet sent is 1500 octets." (An octet is an 8-bit byte).

2. Kurose

J. F.

& Ross

K. W. (2017). Computer Networking: A Top-Down Approach (7th ed.). Pearson. In Chapter 6

"The Link Layer and LANs

" Section 6.4.1 "Ethernet Frame Structure

" the text specifies that the maximum size of the data field (payload) in an Ethernet frame is 1

500 bytes

which in turn limits the size of the IP datagram it can carry without fragmentation.

3. Comer

D. E. (2018). Internetworking with TCP/IP Volume 1: Principles

Protocols

and Architecture (6th ed.). Pearson. Chapter 11

"Datagram Forwarding

" discusses the concept of MTU and fragmentation

noting that Ethernet has a fixed MTU that limits the size of the datagrams it can carry. The standard value of 1500 bytes for Ethernet is a central concept in this discussion.

Scroll to Top