300-425 practice question 3 of 25
A company is in the process of relocating to a new force space and ends out that the Internet circuit will not be ready before the move. The new building has a non-Cisco WLAN to which they can connect. The engineer has a 12-port switch and one Cisco autonomous AP and must connect multiple wired devices. Which additional device is needed to get all clients connected over the workgroup bridge?
Full set: 286 questionsDomain Wired and Wireless Infrastructure
A Cisco autonomous access point configured as a Workgroup Bridge (WGB) acts as a wireless client on behalf of wired devices. While connecting the WGB to a switch allows multiple physical connections, it creates a single, flat Layer 2 network with the upstream non-Cisco WLAN. This design is problematic as it relies on the upstream network to provide DHCP addresses for all clients and may violate security policies that limit the number of MAC addresses per wireless client. A router is the necessary additional device. It connects between the WGB/switch and the client devices. The router obtains a single IP address from the upstream WLAN on its WAN interface and then uses Network Address Translation (NAT) to allow all wired clients on its LAN side to share that connection. It also provides essential DHCP services and creates a separate, secure subnet for the company's devices.
B. transparent firewall: A transparent firewall operates at Layer 2 for security inspection and does not provide the required routing, network segmentation, or NAT functionality.
C. hub: A hub is an obsolete Layer 1 device. The provided 12-port switch is a superior Layer 2 device that already serves the purpose of physical port aggregation.
D. wireless controller: The scenario explicitly states the use of a Cisco autonomous AP, which is managed independently and does not use a wireless LAN controller.
1. Cisco IOS Configuration Guide for Autonomous Aironet Access Points
Cisco IOS Release 15.3(3)JAB
Chapter: "Configuring a Workgroup Bridge
Repeater
or Root Bridge": This document describes the function of a WGB
stating it "associates to another access point as a client." This client role implies that from the upstream network's perspective
it's a single connection. To properly manage and support multiple downstream devices with their own network services
a Layer 3 device (router) is required for NAT and DHCP.
2. Cisco Aironet 1550 Series Outdoor Access Point Deployment Guide
Section: "Workgroup Bridge for Ground-Based Mobility"
Figure 4-1 "Onboard Network Architecture": This official Cisco deployment guide illustrates a best-practice design using a WGB. The diagram clearly shows the WGB connecting to an onboard network that includes a router. The router provides connectivity and services to the local wired clients
while the WGB provides the wireless uplink. This demonstrates the standard architecture for this type of solution.
3. Kurose
J. F.
& Ross
K. W. (2017). Computer Networking: A Top-Down Approach (7th ed.). Pearson. Chapter 4
Section 4.4.2
"The Network Address Translation (NAT) Router": This foundational academic textbook explains that a NAT-enabled router is the standard device used to connect a local
private network (like the one being set up in the new office space) to a larger external network. The router allows multiple devices to share a single IP address from the external network
which is precisely the function needed in the question's scenario.
Keep practicing
Take the free 300-425 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other 300-425 practice questions
- Question 2A wireless consultant reviewing the installation of an old wireless network. The existing…
- Question 4An engineer must deploy a wireless network in an open-plan environment that has three SSI…
- Question 5A hospital wireless environment was designed with these characteristics: • RF coverage • …
- Question 6A customer has this wireless design: • two Cisco Catalyst 9800 Series wireless controller…
- Question 7An engineer is implementing a wireless design for a service provider. The design includes…
- Question 8Which authentication method is most scalable for enterprise WLAN deployments?
