300-425 practice question 5 of 25

A hospital wireless environment was designed with these characteristics: • RF coverage • better than -67 dBm in the 5 GHz spectrum • RRM be used for DCA and TPC in the 2.4 GHz band • RRM be used for DCA and TPC in the 5 GHz band After deployment, why do many of the legacy 802.11b/g devices have difficulty maintaining connectivity?

Full set: 286 questions

Domain Site Survey

Answer options
A: Excessive co-channel interference in the 2.4 GHz band exists.
B: Excessive overlapping channels in the 2.4 GHz band exists.
C: TPC drastically increases Tx power in the 2.4 GHz band.
D: TPC drastically reduces Tx power in the 2.4 GHz band. Correct answer
Correct Answer:
D. TPC drastically reduces Tx power in the 2.4 GHz band.
Explanation

The network was designed for high-density 5 GHz coverage (-67 dBm), which requires placing Access Points (APs) close together. While this meets the 5 GHz goal, it causes the co-located 2.4 GHz radios to hear neighboring APs at very high signal levels. The Radio Resource Management (RRM) Transmit Power Control (TPC) algorithm identifies this as excessive co-channel interference. To mitigate this, TPC drastically reduces the transmit power of the 2.4 GHz radios. This aggressive power reduction can create significant coverage gaps or areas of very weak signal, causing the legacy 802.11b/g devices, which only operate in the 2.4 GHz band, to lose connectivity.

Why Incorrect

A. Excessive co-channel interference in the 2.4 GHz band exists. This is the cause that triggers the TPC algorithm, not the direct reason for client connectivity failure. The failure is the result of TPC's corrective action (power reduction).
B. Excessive overlapping channels in the 2.4 GHz band exists. The RRM Dynamic Channel Assignment (DCA) feature is designed specifically to minimize adjacent and overlapping channel interference by assigning non-overlapping channels (1, 6, 11), making this unlikely.
C. TPC drastically increases Tx power in the 2.4 GHz band. This is incorrect. In a dense deployment with high co-channel interference, TPC's primary function is to decrease transmit power to reduce interference, not increase it.

References

1. Cisco

"Radio Resource Management under Unified Wireless Networks" White Paper.

Section: Transmit Power Control (TPC)

Quote/Content: The document states

"The goal of TPC is to achieve the best possible coverage while reducing co-channel interference... TPC balances the desire for coverage with the need to limit co-channel interference... TPC seeks to reduce the AP's transmit power in order to reduce this interference." This confirms that TPC's response to high interference (found in dense deployments) is to reduce power.

2. Cisco

"High Density Wi-Fi Design and Configuration Guide" (CVD).

Section: 2.4-GHz Radio Considerations

Quote/Content: This guide explains that in high-density designs optimized for 5 GHz

"the 2.4-GHz radio power is often driven to the lowest setting by the RRM Transmit Power Control (TPC) algorithms because of the density of the APs." This directly supports the conclusion that TPC reduces power in this scenario

leading to potential coverage issues for 2.4 GHz clients.

3. Cisco

"Cisco Wireless LAN Controller Configuration Guide

Release 8.5".

Chapter: Radio Resource Management

Section: Information About RRM > Transmit Power Control (TPC) Algorithm

Quote/Content: The guide details that TPC adjusts power based on several metrics

including neighbor signal strength. "If an AP hears its neighbor at a signal strength above the TPC threshold (default is –70 dBm)

it will reduce its transmit power." In the hospital scenario

dense AP placement ensures neighbors are heard well above this threshold

triggering the power reduction.

Scroll to Top