300-730 practice question 11 of 25
An organization wants to distribute remote access VPN load across 12 VPN headend locations supporting 25,000 simultaneous users. Which load balancing method meets this requirement?
Full set: 175 questionsFor a large-scale deployment with 12 geographically distributed VPN headend locations, DNS-based load balancing is the most suitable and scalable method. A single, user-friendly FQDN (e.g., vpn.example.com) is configured in the AnyConnect profile. The DNS infrastructure, often using GeoDNS, resolves this FQDN to the IP address of the most appropriate headend for a given user, based on their geographic location, server load, or round-robin. This provides both load distribution and site resiliency transparently to the 25,000 users.
A. Using one VPN profile per site would require users to manually select a location from a list of 12. This is not an automatic load balancing method and provides a poor user experience.
C. AnyConnect native load balancing is designed for an ASA cluster at a single location. It cannot distribute load across 12 geographically separate headend sites.
D. Equal cost, multipath (ECMP) is a Layer 3 routing technique that load balances packets across multiple paths to the same destination. It is not a client-to-headend selection mechanism for VPNs.
1. Cisco, "AnyConnect VPN Load Balancing," External Load Balancers, Published: March 1, 2011. "For geographically separated data centers, Cisco recommends using a global load-balancing solution, such as the Cisco Global Site Selector (GSS), which uses DNS to direct clients to the appropriate data center."
2. Cisco, "Cisco AnyConnect VPN Deployment and Best Practices," Load Balancing, Section: "External Load Balancers". This document explains that for large-scale or geographically dispersed deployments, external load balancers or DNS-based mechanisms are the recommended approach, as opposed to the built-in ASA clustering which is for co-located devices.
Keep practicing
Take the free 300-730 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other 300-730 practice questions
- Question 1An administrator is deciding which authentication protocol should be implemented for thei…
- Question 2A network engineer must design a clientless VPN solution for a company. VPN users must be…
- Question 3A user is experiencing delays on audio calls over a Cisco AnyConnect VPN. Which implement…
- Question 5Which command must be configured on the tunnel interface of a FlexVPN spoke to receive a …
- Question 6An engineer has configured Cisco AnyConnect VPN using IKEv2 on a Cisco IOS router. The us…
- Question 7Which parameter must match on all routers in a DMVPN Phase 3 cloud?
