300-815 practice question 20 of 30

Which IOS command creates a SIP-enabled dial peer?

Full set: 221 questions
Answer options
A: voice dial-peer 20 sip
B: dial-peer voice 20 voip Correct answer
C: dial-peer voice 20 pots
D: dial peer voice 20 sip
Correct Answer:
B. dial-peer voice 20 voip
Explanation

In Cisco IOS, dial peers are created using the dial-peer voice global configuration command. For any IP-based voice call, including SIP and H.323, the correct type is voip. After creating the dial peer with the dial-peer voice 20 voip command, the administrator would then enter dial-peer configuration mode and specify SIP as the session protocol using the session protocol sipv2 command. The command in option B is the correct and necessary first step to create the dial peer object that will be configured for SIP.

Why Incorrect

A. The command syntax is incorrect. The command must start with dial-peer voice, not voice dial-peer. Also, sip is not a valid dial-peer type.
C. This command creates a POTS (Plain Old Telephone Service) dial peer, which is used for circuits connected to the PSTN, not for IP-based SIP calls.
D. The syntax dial peer (with a space) is incorrect; it should be dial-peer. More importantly, sip is not a valid keyword for the dial-peer type.

References

1. Cisco Systems, Inc. (2022). Cisco IOS Voice Command Reference. "dial-peer voice" command reference. This document details the syntax dial-peer voice tag {pots | voip | vofr | voatm | mmoip} and confirms that voip is the type used for IP networks.

2. Cisco Systems, Inc. (2022). Cisco Unified Border Element Configuration Guide Through Cisco IOS XE 17.7. "Configuring Dial Peers on Cisco Unified Border Element" chapter. This guide consistently shows the creation of VoIP dial peers for SIP trunks using the dial-peer voice voip command.

Scroll to Top